133400
25
Zoom out
Zoom in
Previous page
1/88
Next page
Installation
This extractor hood is intended to be
mounted onto the kitchen wall.
Open glass aperture.
1. Remove the grease filter (refer to
operating; Instructions).
2. Draw a line on the wall from the ceiling to
the lower edge of the hood at the centre of
the location where the hood is going to be
mounted.
Ensure that the minimum distance between
the hob and the extractor hood is maintained
- 400 mm for an electric hob and 550 mm
for a gas hob. 1.) When using the drilling
template, please ensure that the clearance
between the bottom edge of the hood
body and the bottom edge of the drilling
template is 755 mm (see Fig. drilling
template).
3. Drill 2x 6 mm ø holes for the upper fixing
bracket.
4. Hole (diameter 10mm) for the attachment
of the exhaust hood.
Tower
Holde
r
Wall Fastener
Connection
for Hos
e
5. Please be certain to center the exhaust
hood over the cooking area.
6. Drill the holes and insert suitable screw
anchors flush.
7. Attach suspension (tower holder angle)
to the upper tower.
8. Screw machine screws into the screw
anchors (Ø10 mm) until they protrude by
about 20mm.
9. Hang the exhaust hood on the upper
attachment points and loosely fasten it
using the washers and nuts.
10. Align the exhaust hood (inspect the
installation) and tighten the nuts.
11. Additionally secure the exhaust hood with
two additional screws.
en
400
200 300
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens lc 957 ka 70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens lc 957 ka 70 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info