Manual Siemens lc 957 ka 70 (page 21 of 88) (English, German, Dutch, French, Italian, Portuguese, Spanish)

133400

Zoom out

Zoom in

1/88

If you encounter a problem

Note: If the light does not function, check

that the bulbs have been inserted correctly.

If an

≡

≡≡

≡

or [ appears in the display:

See „Filters and maintenance“ Section.

If is not possible to operate the extractor

hood:

Disconnect the extractor hood from the

mains electricity supply by pulling out the

plug or switching it off at the main fuse box.

Wait for approx. 1 minute and then switch it

on again.

If you have any questions or if a fault occurs,

please call Customer Service.

(See list of Customer Service

representatives).

When you call, please quote the following:

AB - Nr.: FD

Enter the relevant numbers into the box

above. The AB - Nr. (product no.) and FD

(production date) are shown on the

nameplate which can be seen inside the

extractor hood after the filter frame has been

detached.

The manufacturer of the extractor hoods

accepts no liability for complaints which can

be attributed to the design and layout of the

pipework.

Installation Instructions:

Important information

Old appliances are not worthless rubbish.

Valuable raw materials can be reclaimed by

recycling old appliances. Before disposing

of your old appliance, render it unusable.

You received your new appliance in a

protective shipping carton. All packaging

materials are environmentally friendly and

recyclable. Please contribute to a better

environment by disposing of packaging

materials in an environmentally-friendly

manner.

Please ask your dealer or inquire at your

local authority about current means of

disposal.

The extractor hood can be used in exhaust

air or circulating air mode.

Always mount the extractor hood over the

centre of the hob.

Minimum distance between electric hob and

bottom edge of extractor hood: 400 mm,

The extractor hood must not be installed over

a solid fuel cooker - a potential fire hazard

(e.g. flying sparks) -unless the cooker

features a closed, non-removable cover

and all national regulations are observed.

The smaller the gap between the extractor

hood and hotplates, the greater the

likelihood that droplets will form on the

underside of the extractor hood.

Additional information concerning gas

cookers:

When installing gas hotplates, comply with

the relevant national statutory regulations

(e.g. in Germany: Technische Regeln Gas-

installation TRGI).

Always comply with the currently valid

regulations and installation instructions

supplied by the gas appliance manufacturer.

Only one side of the extractor hood may be

installed next to a high-sided unit or high

wall. Gap at least 50 mm.

Minimum distance on gas hotplates

between the upper edge of the trivet

and lower edge of the extractor

hood: 550 mm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens lc 957 ka 70 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens lc 957 ka 70 Manual

Product: