Manual Siemens LC 956KA30 (page 22 of 52) (English, German, Dutch, French)

109985

Zoom out

Zoom in

1/52

Prior to installation

The exhaust air is discharged upwards through a

ventilation shaft or directly through the outside wall

into the open.

Exhaust air should neither be directed into

a smoke or exhaust ue that is currently used for

other purposes, nor into a shaft that is used for

ventilating rooms in which stoves or replaces are

also located.

Exhaust air may be discharged in accordance

with ofcial and statutory regulations only (e.g.

national building regulations).

Local authority regulations must be observed when

discharging air into smoke or exhaust ues that are

not otherwise in use.

When the extractor hood is operated in exhaust-

air mode simultaneously with a different burner

which also makes use of the same chimney

(such as gas, oil or coal-red heaters, continuous-

ow heaters, hot-water boilers) care must be taken

to ensure that there is an adequate supply of

fresh air which will be needed by the burner for

combustion.

Safe operation is possible provided that the under-

pressure in the room where the burner is installed

does not exceed 4 Pa (0.04 mbar).

This can be achieved if combustion air can ow

through non-lockable openings, e.g. in doors, win-

dows and via the airintake/ exhaust-air wall box or

by other technical measures, such as reciprocal

interlocking, etc.

If the air intake is inadequate, there is a risk of

poisoning from combustion gases which are drawn

back into the room.

An air-intake/exhaust-air wall box by itself is no

guarantee that the limiting value will not be ex-

ceeded.

Note: When assessing the overall requirement, the

combined ventilation system for the entire house-

hold must be taken into consideration. This rule

does not apply to the use of cooking appliances,

such as hobs and ovens.

If the exhaust air is going to be discharged into

the open, a telescopic wall box should be tted into

the outside wall.

For optimum extractor hood efciency:

qShort, smooth air exhaust pipe.

qAs few bends in the pipe as possible.

qDiameter of pipe to be as large as possible and

no tight bends in pipe.

 If long, rough exhaust-air pipes, many pipe

bends or smaller pipe diameters are used,

the air extraction rate will no longer be at an

optimum level and there will be an increase

in noise.

The manufacturer of the extractor hoods ac-

cepts no liability for complaints which can

be attributed to the design and layout of the

pipework.

Exhaust-air mode









600 - 900

Min. 870 - Max.1195

600 - 900

Min. 1000 - Max.1330

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LC 956KA30 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens LC 956KA30 Manual

Product: