23
Installation
Note: Take into account any special
accessories that are going to be fitted.
6. Screw on the upper and the two lower
fixing brackets.
7. Attach the extractor hood.
Adjust the height and align horizontally
with the adjusting screws.
ṇ The glass screen must not touch
the wall.
8. Screw in lower screw (hex screw).
ṇ If any pressure is exerted on the
glass screen when tightening the
screws it could lead to glass breakage.
9. Insert the upper flue duct into the lower
flue duct.
ṇ Protect the cover panels from
scratches, for example by laying the
template used for marking the wall over
the top edge of the lower section.