132193

Siemens lc 86 k 950 Manual

19
Zoom out
Zoom in
Previous page
1/88
Next page
Filters and maintenance
en
Grease filters:
Metal filters are used to trap the greasy
element of the vapours that develop during
cooking.
The filter mats are made from non-
combustible metal.
Caution:
As the filter becomes more and more
saturated with grease, not only does the risk
of it catching fire increase but the efficiency
of the extractor hood can also be adversely
affected.
Important:
By cleaning the metal grease filters at
appropriate intervals, the possibility of them
catching fire as a result of a build-up of heat
such as occurs when deep-fat frying or
roasting is taking place, is reduced.
Saturation indicator:
≡
≡≡
≡
When the grease filters reach saturation
point, an acoustic signal is sounded for 6
seconds after the fan has switched off, and
an
≡
≡≡
≡
appears in the display. The grease
filters should be cleaned straight away.
Cleaning the metal grease filters:
In normal operation (1 to 2 hours daily), the
metal grease filter must be cleaned one a
month.
The filters can be cleaned in a dish-washer.
It is however possible that they will become
slightly discoloured.
The filter must be placed loosely, and NOT
wedged, in the dishwasher.
Important:
Metal filters that are saturated with grease
should not be washed together with other
dishes etc.
When cleaning the filters by hand, soak them
in hot soapy water first of all. Do not use
aggressive, acidic or caustic cleaners.
Then brush the filters clean, rinse them
thoroughly and leave the water to drain off.
Removing and inserting the metal grease
filters:
Only change the grease filter when the front
panel is open.
Please only pivot the pane to a maximum
of 90° as the glass pane could otherwise
be destroyed.
1. Press the catches on the front grease
filters and fold down the grease filters
2. Press the catches on the rear grease
filters and fold down the grease filters.
3. Clean the grease filter.
1
2
4. Insert the clean filters back into the hood.
5. Cancel the
≡
≡≡
≡
in the display.
Press the button 0.
max 90°
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens lc 86 k 950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens lc 86 k 950 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info