Manual Siemens LC 8 A 950 (page 25 of 108) (English, German, Dutch, French, Italian, Portuguese, Spanish)

109333

Zoom out

Zoom in

1/108

Important information

Installation Instructions:

Additional information concerning gas

cookers:

ṇ When installing gas hotplates, comply

with the relevant national statutory

regulations (e.g. in Germany: Technische

Regeln Gasinstallation TRGI).

ṇ Always comply with the currently valid

regulations and installation instructions

supplied by the gas appliance

manufacturer.

ṇ Only one side of the extractor hood

may be installed next to a high-sided unit

or high wall. Gap at least 50 mm.

ṇ Minimum distance on gas hotplates

between the upper edge of the trivet

and lower edge of the extractor

hood: 650 mm, Fig. 1.

ṇ Old appliances are not worthless

rubbish. Valuable raw materials can be

reclaimed by recycling old appliances.

Before disposing of your old appliance,

render it unusable.

ṇ You received your new appliance in a

protective shipping carton. All packaging

materials are environmentally friendly and

recyclable. Please contribute to a better

environment by disposing of packaging

materials in an environmentally-friendly

manner.

Please ask your dealer or inquire at your

local authority about current means of

disposal.

ṇ The extractor hood can be used in

exhaust air or circulating air mode.

ṇ Always mount the extractor hood over

the centre of the hob.

ṇ Minimum distance between electric

hob and bottom edge of extractor hood:

550 mm, Fig. 1.

ṇThe extractor hood must not be

installed over a solid fuel cooker – a

potential ﬁre hazard (e.g. ﬂying sparks) –

unless the cooker features a closed,

non-removable cover and all national

regulations are observed.

ṇ The smaller the gap between the

extractor hood and hotplates, the greater

the likelihood that droplets will form on the

underside of the extractor hood.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LC 8 A 950 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens LC 8 A 950 Manual

Product: