Manual Siemens lc 754 wa 20 (page 25 of 88) (English, German, Dutch, French, Italian, Portuguese, Spanish)

133597

Zoom out

Zoom in

1/88

Installation

This extractor hood is intended to be

mounted onto the kitchen wall.

1. Remove the grease ﬁlter (refer to

Operating Instructions).

2. Draw a line on the wall from the ceiling

to the lower edge of the hood at the

centre of the location where the hood is

going to be mounted.

3. Using the template, mark positions on

the wall for the screws.

ṇEnsure that the minimum distance bet-

ween the hob and the extractor hood is

maintained – 550 mm for an electric hob

and 650 mm for a gas hob. The bottom

edge of the template equates to the lower

edge of the extractor hood.

4. Drill 5 holes (dia. 8 mm) for the

extractor hood and 4 holes (dia. 8 mm)

for the brackets for ﬁxing the ﬂue ducts

and insert wall plugs ﬂush with the wall.

Note: Take into account any special

accessories that are going to be ﬁtted.

5. Screw on the 2 brackets for ﬁxing the

upper and lower ﬂue ducts.

6. In order to help ﬁx the hood onto the

wall, screw in the middle screw (without

a washer) until it protrudes by approx.

5 mm.

7. Hook the extractor hood over the screw

in the wall

228

465

220

400

113

mind.

550 Elektro

650 Gas

ca. 5mm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens lc 754 wa 20 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens lc 754 wa 20 Manual

Product: