635039
36
Zoom out
Zoom in
Previous page
1/37
Next page
en
36
Appliance self-test
Your appliance features an automatic self-test program
which shows you sources of faults which
may be repaired by customer service only.
Starting the appliance self-test
1. Switch off the appliance and wait 5 minutes.
2. Switch the appliance on again.
3. Press the mode button 7 and the confirmation
button 13 simultaneously for 5 seconds.
The self-test programme starts. If “E..” is indicated on
the display panel, an error has occurred. If this fault is
displayed, inform customer service.
Ending the appliance self-test
Press the mode button 7 and the confirmation
button 13 again simultaneously for 5 seconds.
Customer service
Your local customer service can be found in the
telephone directory or in the customer service index.
Please provide customer service with the appliance
product number (E-Nr.) and production number (FD-
Nr.).
These specifications can be found on the rating plate.
To prevent unnecessary call-outs, please assist
customer service by quoting the product and
production numbers. This will save you additional costs.
Repair order and advice on faults
Contact information for all countries can be found
on the enclosed customer service list.
Fault Possible cause Remedial action
Floor of the refrigerator
compartment is wet.
The condensation channel or drainage hole
are blocked.
Clean the condensation channel and the drainage hole.
See chapter Cleaning the appliance.
The side panels of the appliance are
warm.
Pipes run into the side panels which heat
during the cooling process.
That is normal behaviour for the appliance and not a fault.
Appliance has no refrigeration
capacity.
The light does not work.
The display does not illuminate.
Appliance has been switched off. Press the On/Off button.
Power failure. Check whether the power is on.
The fuse has been switched off. Check the fuse.
The mains plug has not been inserted properly. Check whether the mains plug is secure.
The refrigerating unit
is switching on more frequently
and for longer.
Appliance opened frequently. Do not open the appliance unnecessarily.
The ventilation openings have been covered. Remove obstacles.
Large quantities of fresh food are being frozen. Do not exceed max. freezing capacity.
GB 0344 892 8999 Calls charged at local or mobile rate.
IE 01450 2655 0.03 € per minute at peak. Off peak
0.0088 € per minute.
US 866 447 4363 toll-free
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens KM40FSB20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens KM40FSB20 in the language / languages: English, German as an attachment in your email.

The manual is 4,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens KM40FSB20

Siemens KM40FSB20 User Manual - Dutch, French, Spanish - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info