789948
47
Zoom out
Zoom in
Previous page
1/128
Next page
Troubleshooting en
47
Fault Cause troubleshooting
A warning signal sounds and
lights up. Different causes are pos-
sible.
Press .
aThe alarm is switched off.
The appliance door is open. Close the appliance door.
Temperature problem
Fault Cause troubleshooting
The temperature differs
greatly from the setting. Different causes are pos-
sible. 1. Switch off the appliance.
→Page41
2. Switch the appliance back on after
fiveminutes. →Page40
If the temperature is too
warm, check the temperature
again after a couple of hours.
If the temperature is too cold,
check the temperature again
on the following day.
Cool-fresh compartment is
too warm or cold. Standard setting is too high
or too low, e.g. frost in cool-
fresh compartment.
Note:The standard setting of the cool-
fresh compartment is preset at 0. Set-
ting 0 corresponds to a temperature of
around 0°C. You can set the temperat-
ure in the cool-fresh compartment to
3settings warmer or colder.
1. Press until the temperature
display flashes.
2. To change the setting, press / .
Setting –3 corresponds to the
coldest setting.
Setting +3 corresponds to the
warmest setting.
aThe selected setting is saved after
one minute.
Noise
Fault Cause troubleshooting
Appliance has a humming
sound. Not a fault. A motor is run-
ning, e.g. refrigerating unit,
fan.
No action required.
The appliance bubbles,
buzzes or gargles. Not a fault. Refrigerant flows
through the pipes. No action required.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens KI41FSDD0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens KI41FSDD0 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info