635772
22
Zoom out
Zoom in
Previous page
1/64
Next page
22
4. Lift the panel up and pull it out (fig. C).
Clean the panels with glass cleaner and a soft cloth.
: Risk of injury!
Scratched glass in the appliance door may develop into a
crack. Do not use a glass scraper, sharp or abrasive cleaning
aids or detergents.
Installation
During installation, make sure that the lettering "top right" is
upside down at the bottom left.
1. Insert the panel at an angle towards the back (fig. A).
2. Insert the top panel at an angle towards the back into the
brackets. The smooth surface must face outwards. (fig. B).
3. Put the cover back in place and press on it.
4. Attach the oven door.
Do not use the oven again until the panels have been
correctly installed.
Troubleshooting
Malfunctions often have simple explanations. Refer to the table
before calling the after-sales service as you may be able to
remedy the fault yourself.
Fault table
If a dish does not turn out as well as you had hoped, please
refer to the section Tested for you in our cooking studio. It
contains useful tips and information on cooking, baking,
roasting and frying.
: Risk of electric shock!
Incorrect repairs are dangerous. Repairs must only be carried
out by technicians that have been trained by our after-sales
service.
Error messages
When the display panel shows an error message with
, press
the
0 button. The message will disappear. The set time
function will be deleted. If the error message does not
disappear, call the Technical Assistance Service.
The following error messages can be solved by the user.
: Risk of electric shock.!
Incorrect repairs can be dangerous. Repairs may only be
carried out by qualified personnel from the Technical
Assistance Service.
&
%
$
Fault Possible cause Remedy/information
The oven is not
working.
Faulty fuse. Look in the household fuse
box and check that the fuse
is in working order.
Power cut. Check whether the kitchen
light or other kitchen appli-
ances are working.
The clock dis-
play is flashing.
Power cut. Reset the time.
The oven is not
heating up.
Dust on the
contacts.
Turn the hotplate lever to
the right and left a couple of
times.
The gas burner
will not ignite.
Power cut or
damp spark
plugs.
Light the gas burner with a
gas lighter or a match.
The LED light-
ing on the glass
cover is not
working.
The LED light-
ing button has
not been
pressed.
Press the LED lighting but-
ton.
The glass cover
on the appli-
ance is not fully
open or is
closed.
Open the glass cover on
the appliance fully.
The glass cover
has not been fit-
ted correctly.
Make sure that the hinges
on the glass cover have
been fitted correctly; see
the "Glass cover" section.
Error message Possible cause Solution/advice
“‹‚‚
A button has
been pressed
for too long or
has got stuck.
Press all of the buttons one
by one. Check if any button
is stuck, covered or dirty.
Fault Possible cause Remedy/information
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens HX74W536N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens HX74W536N in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info