790196
16
Zoom out
Zoom in
Previous page
1/56
Next page
en Basic operation
16
→"Basic operation", Page16
6. Press ⁠ to start the operation.
Ventilate the kitchen while the appliance is heat-
ing.
7. When the cooking time has elapsed, press ⁠ to
switch the appliance off.
8. Once the appliance has cooled down, clean the
smooth surfaces in the cooking compartment with a
detergent solution and a dish cloth.
9. Empty the water tank and dry the cooking compart-
ment.
→"After every steam operation", Page20
10. Clean the accessories thoroughly using a detergent
solution and a dish cloth or soft brush.
8  Basic operation
8.1 Switching on the appliance
Press ⁠ to switch the appliance on.
The ⁠ button lights up blue.
aThe Siemens logo appears in the display. A type of
heating and a temperature are then displayed.
8.2 Switching off the appliance
Switch your appliance off when you are not using it.
The appliance will switch itself off automatically if it is
not used for a certain period of time.
Press ⁠ to switch the appliance off.
The light above the ⁠ button goes out.
aThe appliance switches off. Any functions currently
in progress are cancelled.
aThe time or residual heat indicator appears in the
display.
8.3 Starting operation
You must start each cooking operation.
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120°C, this will damage the enamel.
Do not use the appliance if there is water on the
cooking compartment floor.
Wipe away any water on the cooking compartment
floor before operation.
Press ⁠ to start the operation.
aThe settings, the run time and the heat-up line ap-
pear on the display.
8.4 Pausing or cancelling operation
You can briefly pause the operation and then continue.
If you cancel the operation completely, the settings are
reset.
1. To pause the operation briefly:
Briefly press ⁠.
To continue the operation, press ⁠.
2. To cancel the operation, press ⁠.
aThe operation stops and all of the settings are reset.
8.5 Setting an operating mode
Requirement:The appliance must be switched on.
1. Press ⁠.
The operating modes menu opens.
2. Press the operating mode that you require.
Various options are available depending on the op-
erating mode.
3. The selection can be changed using the rotary se-
lector.
Change any further settings depending on the selec-
tion.
4. Press ⁠ to start.
8.6 Setting the type of heating and the
temperature
When you switch on the appliance, the types of heating
operating mode is set automatically.
1. Turn the rotary selector to select the required type
of heating.
2. Press the temperature.
3. Use the rotary selector to set the temperature.
4. Press ⁠ to start the operation.
aThe appliance starts heating.
aThe set type of heating, temperature and cooking
time/appliance run time are shown in the display.
5. When the food is ready, press ⁠ to switch the
appliance off.
Tip:The most suitable type of heating for your food
can be found in the type of heating description.
Note:You can also set a cooking time and an opera-
tion end time on the appliance.
→"Time-setting options", Page17
Changing the type of heating
When you change the type of heating, the other set-
tings are also reset.
1. Press ⁠ to pause operation.
2. Press the type of heating.
3. Turn the rotary selector to select the required type
of heating.
aThe corresponding recommended temperature ap-
pears on the display.
Changing the temperature
Once the operation has started, you can change the
temperature directly.
Use the rotary selector to change the temperature.
aThe temperature is applied immediately.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens HN878G4B6B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens HN878G4B6B in the language / languages: English as an attachment in your email.

The manual is 1.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info