472273
49
Zoom out
Zoom in
Previous page
1/98
Next page
Non sempre bisogna chiamare il servizio di assistenza
tecnica. In molti casi, l'utente stesso può risolvere il
problema.
La seguente tabella contiene qualche consiglio.
Nota importante:
Interventi sui circuito gas o elettrico devono essere
effettuati solo dal servizio assistenza autorizzato.
Situazioni anomale: Problemi
e soluzioni
47
Cosa succede...
Possibile causa Soluzione
...se il funzionamento elettrico
generale è guasto?
-Fusibile difettoso.
-È possibile che sia saltato
l'interruttore automatico o quello
differenziale.
-Verificare se gli interruttori elettrici
-Verificare nella scatola generale
di sicurezza sono intervenuti.
automatico o un differenziale.
...se l'accensione elettrica non
funziona?
È
le candele e i bruciatori.
-I bruciatori sono bagnati.
-I coperchi del bruciatore sono mal
di cibo o di prodotti di pulizia fra
collocati.
-La distanza tra candela e
di ingresso se è saltato l'interruttore
accuratamente.
-Asciugare con cura i coperchi dei
bruciatori.
Controllare che i coperchi siano
bruciatori deve essere pulito
stati ben collocati.
...se la fiamma dei bruciatori non
è uniforme?
- possibile che vi siano residui
non sono stati collocati
-Le fessure di uscita del gas dei
-I diversi elementi del bruciatore
pezzi.
-Collocare correttamente i vari
...se il fusso di gas non
sembra normale o se non
esce gas?
-Il contatore ha il rubinetto
parzialmente chiuso.
-Se il gas proviene da una
bombola, può darsi che
- Aprire completamente il rubinetto
del gas.
-Sostituire la bombola vuota con
dei bruciatori.
una piena.
della cucina?
-Il rubinetto è aperto o non è
perfettamente ermetico.
bruciatori sono sporche.
-Possibile fuga nel raccordo della
correttamente.
-Controllare.
-Pulire le fessure di uscita del gas
normale.
...se c'è odore di gas all'interno
quest'ultima sia vuota.
-Accertarsi che il raccordo sia
segnale acustico?
-Il sistema di sicurezza si è
attivato, interrompendo il
bombola.
passaggio del gas.
-Collocare la manopola del
È
normalità.
...se si spengono tutti i
bruciatore e viene emesso un
bruciatori e viene emesso un
...se si spegne qualche
segnale acustico?
-Surriscaldamento del piano
cottura.
-Collocare tutte le manopole in
posizione di spento. Il segnale
Il segnale cesserà. ora possibile
cesserà. Attendere 30 min. prima
bruciatore in posizione di spento.
di utilizzare nuovamente il piano
utilizzare il piano cottura con
cottura.
Se il segnale non cessa, chiamare
il Servizio Tecnico.
...se si spengono tutti i
bruciatori e viene emesso un
segnale acustico?
generale.
-Rilevamento di un guasto
-Dopo un minuto verrà emesso
un segnale acustico. Se questo
non accade contattare
l'assistenza tecnica.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens HK48060 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens HK48060 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 11,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info