429223

Siemens hipath 3350 v8 Manual

12
Zoom out
Zoom in
Previous page
1/46
Next page
XPR100us01.fm
User Manual 1-3
For internal use only
Introduction
Signaling Incoming Messages
???The "Record" feature is started and stopped via the programmed recording button (see the
HiPath 3000 service manual) on a system telephone (such as optiPoint) or via a feature proce-
dure on a non-system telephone.
1.4 Signaling Incoming Messages
1.4.1 Visual or Acoustic Signaling
When a new message arrives, the message LED (Message Waiting Indication)* automatically
illuminates on the assigned HiPath 3000 station. A special dial tone* is used on devices that do
not have an MWI LED.
With software version HE200V.03.202 and HiPath system software V5.0 (SMR5) or later, the
number of new messages is shown on the system telephone display.
Signaling starts when the first message arrives and is automatically stopped after the last mes-
sage has been retrieved.
If a notification call is set up and activated for a particular mailbox, this is performed in addition
to the message being signaled on the phone.
* Depends on HiPath 3000 configuration
1.4.2 E-mail Signaling
With software version HE200V.03.202 and HiPath system software V5.0 (SMR5) or later, new
messages on a mailbox can also be signaled via e-mail. Up to three e-mail addresses can be
entered with an optional WAV file attachment for each address.
There are three methods of deleting voicemail:
● Manually:
Voicemail can only be deleted manually via the TUI.
● Automatically once notified:
Voicemail is automatically deleted once a notification has been sent.
● Automatically after set time:
???Voicemail is deleted once a set time period has elapsed (see "Automatic deletion of
messages after a set time"). Only voicemail that has already been retrieved is deleted.
This feature can only be configured using HiPath 3000 Manager.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens hipath 3350 v8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens hipath 3350 v8 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info