35934
32
Zoom out
Zoom in
Previous page
1/136
Next page
Configuration and Settings
Personal_Edition_ConfigSettings.fm
Advanced Tab Settings - General
A31003-S5030-U100-4-7619, March 2009
32 OpenScape UC Application V3 Personal Edition, Installation and User Guide
To edit the settings for the central configuration, open General - Central
Configuration.
If a central configuration is available for your installation, enable the option
and select the required setting under Connection. The following options are
available:
No use
No central configuration.
Complete use
Full use of central configuration.
Only for encryption
Central configuration only used for the encryption of voice signaling.
Enter the IP address and the port number of the DLS server under Server
(DLS). The DLS port is the port number used for accessing the central server.
Select the client address under Client (DLC). You can either choose Specify
automatically or the IP address(es) in accordance with the configuration on
the client PC. Or, you can enter an IP address by hand here.
If you use central configuration here and have multiple network cards and/or
multiple IP addresses on a network card, you must deactivate the Specify
automatically option and manually configure the IP address/MAC address to
be used.
The IP address/MAC address set here is then transferred to the DLS
connected.
Enter the local port number where the OpenScape Desktop Client PC
responds to queries from the central server in the DLC Port field.
Select the network card ID used for DLS-server exchange in the Network
card field. The options available here are Specify automatically or the
network card IDs configured on the PC.
IDs of network cards that are no longer available in the PC are depicted in
brackets ( ) in this list.
Note: These settings are entered by default if you set central configuration
utilization (and specify the server, where applicable) during OpenScape Desktop
Client installation.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Hipath 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Hipath 3000 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Hipath 3000

Siemens Hipath 3000 User Manual - Dutch - 136 pages

Siemens Hipath 3000 User Manual - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info