18
Refitting
1. Grip the upper section of the intermediate panel with both
hands and insert it into the guide at the bottom. (Fig. A).
Note: Make sure that the panel is aligned evenly, at the
bottom.
2. The lettering must be positioned in the top right corner, so
that it can be easily read. (Fig. B).
3. Push the safety catches downwards. (Fig. C).
4. Insert the door panel into the guide with both hands. (Fig. D).
5. Push the door panel downwards, lift it slightly and hook it in
at the top. (Fig. E).
Make sure that the door panel is sitting flush with the control
panel.
6. Fully open the door, while holding the panels firmly with one
hand. (Fig. F).
7. Push the door downwards again and tighten the screws
hand-tight using a flat-bladed screwdriver (blade width 8-
11 mm), close the door. (Fig. G).
Note: The oven may only be used again when the panels are
correctly installed.
Malfunction table
Malfunctions often have simple explanations. Please refer to the
malfunction table before calling the after-sales service.
If a meal does not turn out exactly as you wanted, refer to the
Tested for you in our cooking studio section, where you will
find plenty of cooking tips and tricks.
ã=Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out by one of our trained after-sales engineers.
Malfunction table
Problem Possible cause Remedy/information
The appliance does not work. Defective fuse Look in the fuse box and check that the circuit
breaker is in working order.
Plug not plugged in Plug it in.
Power cut Check whether the kitchen light works.
