13
2. Using the ¿ or ¾ button, move to the cooking time and set
the cooking time using the rotary selector.
3. Press the 0 button.
The Time-setting options menu closes.
4. If the operation has not yet started, press the † button.
You can see the
x cooking time counting down in the status
bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
the cooking time as x 0:00. You can cancel the signal early
by pressing the 0 button.
Cancelling the cooking time
Press the 0 button to open the menu. Move to the cooking
time using the
¿ or ¾ button and set the cooking time to 0:00
with the rotary selector. The type of heating and temperature
set are shown in the display. The programme will then continue
untimed.
Changing the cooking time
Press the
0 button to open the menu. Using the ¿ or ¾
button, move to the cooking time and set the cooking time
using the rotary selector. Press the
0 button to close the
menu.
Setting a later end time
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
Example: you put the food in the cooking compartment at 9:30
am. It takes 45 minutes to cook and will be ready at 10:15, but
you would like it to be ready at 12:45 instead. Change the end
time from 10:15 to 12:45. The oven goes into standby.
Cooking starts at 12:00 and finishes at 12:45.
In some programmes, it is not possible to move the end time.
Setting a later end time
Prerequisite: The selected operation has not already begun and
a cooking time has already been set. The time-setting options
menu
0 is open.
1. Move to the end time using the ¿ button. The end time is
displayed.
2. Using the rotary selector, set a later end time.
3. Press the 0 button to close the time-setting options menu.
4. Confirm by pressing the † button.
The setting is adopted. The oven is in standby, the y end time
is displayed in the status bar. Operation starts at the
appropriate time. You can see the
z cooking time counting
down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
the cooking time as
x 0:00. You can cancel the signal early
by pressing the
0 button.
Correcting the end time
This is possible, providing the oven is on standby. To do this,
open the menu with the
0 button, move to the end time with
the
¿ or ¾ button and adjust the end time using the rotary
selector. Press the
0 button to close the menu.
Cancelling the end time
This is possible, providing the oven is on standby. To do this,
open the menu with the
0 button, move to the end time using
the ¿ or ¾ button and turn the rotary selector anti-clockwise
until the display disappears. The cooking time immediately
starts to count down.
Setting the clock
The oven must be switched off before you can set or change
the clock.
Following a power cut
"Set clock" appears in the status bar following a power cut.
1. Turn the rotary selector to set the current time.
The display language set is displayed in the settings area on
the right-hand side. This does not change following a power
cut.
2. Press the 0 button.
The time is applied.
Changing the clock
Example: changing from summer to winter time.
1. Press the 0 button.
The time-setting options menu appears.
2. Use the ¿ button to move to the 0 clock, then change the
time using the rotary selector.
3. Press the 0 button.
The time-setting options menu closes.
Changing the clock display
The clock appears in the display when the oven is switched off
and shows the current time. You can change the display to a
different clock appearance, to digital time or remove the clock
from the display. For more information, refer to the Basic
settings section.
