12
Time-setting options
You can call up the time-setting options menu by pressing
the
0 button. The following functions are available:
If the oven is switched off:
■ Setting the timer
■ Setting the clock
If the oven is switched on:
■ Setting the timer
■ Setting the cooking time
■ Setting a later end time
Setting the time-setting options in brief
1. Press the 0 button to open the menu.
2. Switch to the required function, using the
¾ or ¿ button. The
setting area is light, the text is dark.
3. Use the rotary selector to set the clock or cooking time.
4. Press the
0 button to close the menu.
A detailed description of how to adjust each individual function
is provided below.
Setting the timer
The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time.
1. Press the
0 button.
The time-setting options menu opens.
2. Set the running time for the timer using the rotary selector.
3. Press the 0 button to close the menu.
The display returns to its previous state. The
U symbol for the
timer appears, and the time can be seen counting down.
When the time has elapsed
A signal sounds. The display shows
U 0:00. You can cancel
the signal earlier by pressing the
0 button. Press the 0 button
to close the time-setting options menu.
Cancelling the timer time
Open the time-setting options menu using the
0 button and
turn the time back to 0:00. Press the
0 button to close the
menu.
Changing the timer time
Open the time-setting options menu with the
0 button and
change the running time for the timer in the next few seconds.
Press the
0 button to close the menu.
Setting the cooking time
If you set the cooking time for your dish, operation stops
automatically once this time has elapsed. The oven stops
heating.
Prerequisite: The type of heating and temperature must be set.
Example in the picture: setting for top/bottom heating, 180 °C,
cooking time of 45 minutes.
1. Press the
0 button.
The Time-setting options menu appears.
2. Using the
¿ or ¾ button, move to the cooking time and set
the cooking time using the rotary selector.
3. Press the
0 button.
The Time-setting options menu closes.
4. If the operation has not yet started, press the
† button.
You can see the
x cooking time counting down in the status
bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
the cooking time as
x 0:00. You can cancel the signal early
by pressing the
0 button.
Cancelling the cooking time
Press the
0 button to open the menu. Move to the cooking
time using the
¿ or ¾ button and set the cooking time to 0:00
with the rotary selector. The type of heating and temperature
set are shown in the display. The programme will then continue
untimed.
Changing the cooking time
Press the
0 button to open the menu. Using the ¿ or ¾
button, move to the cooking time and set the cooking time
using the rotary selector. Press the
0 button to close the
menu.
Setting a later end time
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
A later end time can be set for
■ all types of heating
■ a variety of programmes
■ and for self-cleaning
Example: you put the dish in the cooking compartment at 9.30 .
It takes 45 minutes to cook and will be ready at 10.15, but you
would like it to be ready at 12.45 instead.
Change the end time from 10.15 to 12.45. The oven goes into
standby. Cooking starts at 12.00 and finishes at 12.45.
This function is also available for self-cleaning. You can shift the
time of the cleaning operation so it is carried out at night, which
means that the oven is available at all times during the day.
