476345
11
Zoom out
Zoom in
Previous page
1/24
Next page
11
Unhooking the door
1.Fully open the oven door.
2.Remove both locking levers located on the right and left hand
sides (figure A).
3.Fully close the oven door as far as possible (figure B). Grip
the left and right hand sides of the door with both hands.
Close the door slightly more and remove it.
Hanging the door
Rehang the door by following the same steps but in reverse
order.
1.When refitting the door, check that both hinges are
positioned exactly inside their respective openings (pictur A).
2.The bottom groove of the hinges must fit snugly on both
sides.
The door may be left crooked if the hinges are not mounted
properly.
3.Reclose the attachment levers (picture C). Close the oven
door.
ã=Risk of injuries.!
Do not touch the hinges; the door might accidentally fall or a
hinge might suddenly close. Notify the Technical Assistance
Service.
Removing the door covering
The oven door cover can change colour with time. For better
cleaning, we recommend removing the cover.
1.Fully open the oven door.
2.Unscrew the oven door cover. To do this, unscrew the right
and left hand side bolts (figure A).
3.Remove the cover (figure B).
Ensure that the oven door does not close when the cover is
not in place. The inside glass may damage.
Clean the surface using a product specifically for cleaning
stainless steel.
4.Refit and secure it.
5.Close the oven door.
Fitting and removing the glass panels
The glass panels of the oven door can be removed to make
cleaning easier.
When removing the inner glass panels, take note of the order of
disassembling. To replace the glass panels in the correct order,
refer to the codes that appear on the panels.
Removing
1.Unhook the oven door and position it on a cloth with its
handle pointing downwards.
2.Unscrew the upper oven door cover. To do this, unscrew the
right and left hand side bolts (figure A).
3.Lift and remove the top glass panel (figure B).
4.Unscrew the clips from the right and left and remove them
(figure C).
Remove the glass panel.
5.Tilt and remove the lower glass upwards.
Clean the glass panels using a glass cleaning product and a
soft cloth.
Do not use abrasive or corrosive cleaning products, glass
scrapers, or hard metal scourers as these could damage the
glass.
%
$
%
$
&
%
$
%
$
&
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens HB64AA520F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens HB64AA520F in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens HB64AA520F

Siemens HB64AA520F User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info