21
Basic settings
Your appliance has various basic settings, which are preset at
the factory. You can change the basic settings as you require.
If you want to cancel all the changes, you can restore the
factory settings.
The appliance must be switched off.
1. Switch off the appliance.
2. Press and hold the
± button for approx. 4 seconds until
"Select language" appears on the display.
3. Press the
¿ button until the desired basic setting appears.
4. Turn the rotary selector to change the setting.
5. Press and hold the
± button for approx. 4 seconds to exit
Basic settings.
The change is saved.
You can change the following basic settings:
Automatic switch-off
If you do not change the settings on your appliance for several
hours, the automatic switch-off function will be activated.
"Automatic switch-off" appears in the display.
Press any button to deactivate the automatic switch-off. You
can now make new settings.
Care and cleaning
In this section, you will find information on
■ care and cleaning of your appliance
■ the cleaning aid
■ descaling
: Risk of short circuit!
Do not use high-pressure cleaners or steam jet cleaners to
clean your appliance.
Caution!
Risk of surface damage: Do not use
■ harsh or abrasive cleaning agents
■ oven cleaners
■ corrosive or aggressive cleaners, or those containing
chlorine
■ cleaning agents with a high alcohol content
If such an agent comes into contact with the front of the
appliance, wash it off immediately with water.
Caution!
Risk of surface damage: If descaler or the oven and grill
cleaning gel comes into contact with the front of the appliance
or other sensitive surfaces, wash it off immediately with water.
Remove food residues from the cooking compartment as soon
as the appliance has cooled. Burnt-on remains will be much
harder to remove later.
For heavy soiling use the cleaning aid (see section: Cleaning
aid).
Salts are very corrosive and can cause rust. Remove remains
of acidic sauces (ketchup, mustard) or salted food from the
cooking compartment immediately after cooling.
Do not use hard scouring pads or cleaning sponges.
Basic setting Function Possible settings
Select language Changes the display language 30 different languages
Signal duration Sets the length of the audible signal at the end of an opera-
tion
short / medium / long
Button tone Switch on or off the audible signal that sounds when you
press a button
off / on
Display brightness Changes display brightness day / medium / night
Clock display Displays the clock when the appliance is off analogue 1 / analogue 2 / ana-
logue 3 / digital
Continue after door closed Not necessary to restart after the door has been opened off / automatic
Adjust individually Set programme cooking results to be generally higher or
lower
7 levels -
ÙÙÙÙØÙ +
Display brand logo Switches the brand name logo display on or off when the
appliance is switched on
on / off
Water hardness Sets the water hardness range for the descaling indicator softened / 1-soft / 2-medium / 3-
hard / 4-very hard
Steam cooking heat signal: Audible signal at the end of the heating up phase during
steaming
off / on
Restore factory settings Restores the appliance to the factory settings:
■ All changes to the basic settings are cleared
■ Memory is cleared
■ Automatic calibration is carried out again
do not restore /
restore
