527327
11
Zoom out
Zoom in
Previous page
1/32
Next page
11
timer has been set, first press the
0 button.
After a few seconds, the change is applied.
Setting a later end time
You can delay the time at which you wish your dish to be ready.
The appliance starts automatically and is ready at the desired
time. You can, for example, put your dish in the compartment in
the morning and set the cooking time so that it is ready at
lunchtime.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
For some programmes it is not possible to change the end
time.
In the
é Steam operating mode, the cooking time does not
start counting down until the heating-up time has finished. The
selected end time is delayed by the length of the heating-up
time.
Example in the picture:
it is 10:30, the dish will take 45 minutes to cook but should be
ready at 12:30.
Prerequisites:
An operating mode and temperature have been set.
1. Press the 0 button repeatedly until the arrow is in front of the
cooking time, like this:
Nx.
2. Use the @ or A button to set the cooking time.
3. Press the 0 button.
The
N arrow is in front of y (End time). The time at which the
dish will be ready is displayed.
4. Use the @ button to delay the end time.
5. Press the button.
The appliance switches to standby. The
Ny end time is
shown in the display. Cooking starts at the right time. The
cooking time starts counting down in the display.
Changing the end time
Use the
@ or A button to change the end time. If the timer has
been set, first press the
0 button repeatedly until the arrow is
in front of the End time, like this:
Ny.
After a few seconds, the change is applied. Do not change the
end time if the cooking time has already started to elapse. The
cooking result would no longer be correct.
The cooking time has elapsed
A signal sounds. The appliance stops heating. Press the
0
button to stop the signal. To switch off the appliance, turn the
operating mode and temperature selectors back to
Û. Open the
appliance door carefully. Hot steam will escape.
Cancelling the end time
Use the
A button to set the end time back to the current time. If
the timer has been set, first press the
0 button repeatedly until
the arrow is in front of the End time, like this:
Ny.
After a few seconds, the change is applied. The selected
cooking time starts counting down straight away.
Setting the clock
Example:
change the clock from summer time to winter time.
No other time-setting option should be set.
1. Press the 0 button repeatedly until the N0 arrow is in front
of the clock.
2. Use the @ or A button to set the clock.
After a few seconds, the time which has been set is applied.
After a power cut
After a power cut, the
0 and :‹‹ symbols light up in the
display. Press the
0 button. Use the @ or A button to set the
clock. After a few seconds, the time which has been set is
applied.
Hiding the clock
You can hide the clock. It is then only visible when the
appliance is in operation (see section: Basic settings).
Automatic programmes
You can prepare food really easily with 40 different
programmes.
In this section, you will find out
how to set one of the automatic programmes
hints and tips on the programmes
which programmes you can set
Setting a programme
Select the appropriate programme from the programme table.
Follow the instructions for the programmes.
1. Turn the operating mode selector to X.
The first programme
˜‚ appears in the display panel.
VWDUW
VWRS
NJ
FDOF
3
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens HB34D553 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens HB34D553 in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens HB34D553

Siemens HB34D553 User Manual - German - 32 pages

Siemens HB34D553 User Manual - Dutch - 32 pages

Siemens HB34D553 User Manual - Danish - 32 pages

Siemens HB34D553 User Manual - French - 36 pages

Siemens HB34D553 User Manual - Italian - 36 pages

Siemens HB34D553 User Manual - Polish - 36 pages

Siemens HB34D553 User Manual - Portuguese - 36 pages

Siemens HB34D553 User Manual - Swedish - 32 pages

Siemens HB34D553 User Manual - Spanish - 36 pages

Siemens HB34D553 User Manual - Norwegian - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info