633945

Siemens HB331.0J Manual

8
Zoom out
Zoom in
Previous page
1/24
Next page
8
6.Use the + button to set a later end time.
The setting is adopted after a few seconds.
The display shows the end time until the oven starts
operating.
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
0 button
twice and switch off the function selector.
Note: You can make changes as long as the symbol is
flashing. When the symbol lights up, the setting has been
adopted.
Rapid heating
With rapid heating, your oven reaches the temperature selected
particularly quickly.
Use rapid heating when temperatures above 100 °C are
selected.
To ensure an even cooking result, do not place your dish in the
cooking compartment until rapid heating is complete.
1.Set the function selector to I.
2.Use the temperature selector to set the temperature.
The oven will start heating after a few seconds. The indicator
light above the temperature selector lights up.
The rapid heating process is complete
The indicator light above the temperature selector goes out.
Place your dish in the oven and select the desired type of
heating.
Cancelling rapid heating
Turn the function selector to the off position. The oven switches
off.
Setting the clock
When the appliance is connected for the first time or after a
power cut, the
0 symbol and three zeros flash in the display.
Set the clock. The function selector must be switched off.
Setting procedure
1.Press the 0 Clock button.
12.00 appears in the display and the
0 symbol flashes.
2.Use the + or - button to change the clock.
After a few seconds, the time is saved. The
0 symbol goes
out.
Changing from summer to winter time, for example
Press the
0 Clock button twice and change the time using the
+ or - button.
Setting the timer
You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has a special signal. This means that you
can tell whether the timer duration or the cooking time has
elapsed. You can also set the timer if the childproof lock is
active.
Setting procedure
1.Press the S Timer button.
The
S symbol flashes.
2.Use the - or + button to change the timer duration.
Default value for + button = 10 minutes
Default value for - button = 5 minutes
The timer starts after a few seconds. The
S symbol lights up in
the display. You will see the time counting down.
When the time has elapsed
A signal sounds. Press the
S Timer button. The timer goes out.
Changing the timer duration
Press the
S Timer button. Use the + or - button to change the
time.
Cancelling the setting
Press the
S Timer button. Press the - button until zero is shown
on the display.
The timer and cooking time count down at the same time
Both symbols light up. You can see the timer duration counting
down in the display.
To call up the
x remaining cooking time, y end time or 0
clock:
Press the
0 Clock button repeatedly until the relevant symbol
appears.
The value you are checking appears for several seconds on the
display.
NJ
PLQ
K
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens HB331.0J at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens HB331.0J in the language / languages: English as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info