530846

Siemens HB23AT510 Manual

11
Zoom out
Zoom in
Previous page
1/28
Next page
11
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
N arrow.
To call up the
V timer, x cooking time, y end time or 0
clock, press the
0 button repeatedly until the N arrow is next
to the relevant symbol. The display shows the value for a few
seconds.
End time
You can change the time at which you wish your dish to be
ready. The oven starts automatically and finishes at the desired
time. You can, for example, put your dish in the cooking
compartment in the morning and set the cooking time so that it
is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
Example in the picture: it is 10:30 am, the cooking time is
45 minutes and the oven is required to finish cooking at
12:30 pm.
1. Adjust the function selector.
2. Set the temperature selector.
3. Press the 0 button twice.
4. Use the @ or A button to set the cooking time.
5. Press the 0 button.
The
N arrow is next to y. The time when the dish will be
ready is displayed.
6. Use the @ or A button to set a later end time.
After a few seconds, the oven adopts the settings and switches
to standby position. The display shows the time at which the
dish will be ready and the
N arrow is next to the y symbol.
The
V and 0 symbols go out. When the oven starts, the
cooking time counts down in the display and the
N arrow is
next to the
x symbol. The y symbol goes out.
The cooking time has elapsed
A signal sounds. The oven stops heating. 0:00 is shown in the
display. Press the
0 button. You can set a new cooking time
using the
@ or A button. Or press the 0 button twice and turn
the function selector to the off position. The oven switches off.
Changing the end time
Use the
@ or A button to change the end time. After a few
seconds, the change is adopted. If the timer has been set, first
press the
0 button twice. Do not change the end time if the
cooking time has already started to elapse. The cooking result
would no longer be correct.
Cancelling the end time
Use the
A button to reset the end time to the current time. After
a few seconds, the change is adopted. The oven starts. If the
timer has been set, first press the
0 button twice.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
N arrow.
To call up the
V timer, x cooking time, y end time or 0
clock, press the
0 button repeatedly until the N arrow is next
to the relevant symbol. The display shows the value for a few
seconds.
Clock
After connecting the appliance to the mains or after a power
cut, the
0 symbol and three zeros flash in the display. Set the
clock.
1. Press the 0 button.
The clock in the display shows 12:00. The time symbols light
up and the
N arrow is next to 0.
2. Use the @ or A button to set the clock.
After a few seconds, the time that has been set is adopted.
Changing the clock
No other time-setting option should have been set.
1. Press the 0 button four times.
The time symbols light up in the display and the
N arrow is
next to
0.
2. Use the @ or A button to change the clock.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Childproof lock
The oven has a childproof lock to prevent children switching it
on accidentally.
The oven will not react to any settings. The timer and clock can
also be set when the childproof lock has been activated.
If the type of heating and temperature or grill setting have been
set, the childproof lock interrupts the heating.
Activating the childproof lock
No cooking time or end time should have been set.
Press and hold the
h button for approx. four seconds.
The
@ symbol appears in the display. The childproof lock is
activated.
Deactivating the childproof lock
Press and hold the
h button for approx. four seconds.
The
@ symbol goes out in the display. The childproof lock is
deactivated.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens HB23AT510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens HB23AT510 in the language / languages: English as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens HB23AT510

Siemens HB23AT510 Installation Guide - English - 12 pages

Siemens HB23AT510 User Manual - German - 28 pages

Siemens HB23AT510 Installation Guide - German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info