300383
96
Zoom out
Zoom in
Previous page
1/119
Next page
93
Appendix
Gigaset SL 100 / SL 150 / IM_engl / A31008-L150-J102-1-7619 / appendix.fm / 26.08.2003
Appendix
Care
Wipe the base station and handset with a damp cloth (do not use solvents) or an anti-
static cloth. Never use a dry cloth. This can cause static.
Contact with liquid
If the handset should come into contact with liquid, on no account switch the device
on. Remove the battery immediately.
Allow the liquid to drain out of the device, and then pat all parts of the device dry.
Keep the handset with the battery removed in a warm, dry place for at least 72 hours.
In many cases, you will then be able to use it again.
Questions and Answers
If you have any questions about the use of your phone, you can contact us 24/7 at
www.my-siemens.com/customercare.
You will find the most frequently asked ques-
tions and answers below.
!
What has happened if … Possible cause Possible solution
… the display is blank? The handset is not switched on.
The battery is flat.
Press the "end call" key a for
about 2 sec.
Charge or replace the battery
(page 10).
… the handset fails to respond
to a key press?
The keypad lock is activated. Press the hash key
R
for
about 2 sec. to deactivate the
lock (page 11).
… "Base station x" flashes in
the display?
The handset is outside the range
of the base station.
The base station is not switched
on.
Move the handset nearer to the
base station.
Check the power connector at
the base station (page 8).
Base Search flashes in the
display?
The handset is set for Best
Base. But no base station has
been activated or in range.
Move the handset nearer to the
base station.
Check the power connector at
the base station (page 8).
… the handset does not ring? The ringer is switched off. Activate/deactivate the ringer
(page 83).
… I cannot hear a ringer tone/
dial tone?
You have changed the telephone
cord on your Gigaset.
When purchasing a new cord
ensure that it has the correct
pin connections (page 8).
… the call units/charges are
not displayed?
There are no metering pulses. Ask your network provider to
transmit the metering pulses.
… the other party cannot hear
me?
You have pressed the
u (INT)
key. This mutes the handset.
Switch on the microphone
again (page 20).
… the incoming call number is
not displayed even though
CLIP is set?
Calling line identification is not
enabled.
The caller should ask his net-
work provider to enable the
identification of his number
(CLI).
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset sl100 color at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset sl100 color in the language / languages: English as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset sl100 color

Siemens gigaset sl100 color User Manual - German - 128 pages

Siemens gigaset sl100 color User Manual - German - 128 pages

Siemens gigaset sl100 color User Manual - Dutch - 129 pages

Siemens gigaset sl100 color User Manual - Dutch - 123 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info