490178
68
Zoom out
Zoom in
Previous page
1/83
Next page
66
Gigaset S820-S820A / LUG - AU-NZ en / A31008-M2404-C401-1-7619 / appendix.fm / 11/29/12
Template CES 131x195 1col, Version 1, 12.03.2012
Customer service & product warranty – Australia and New Zealand
Gigaset S820A only:
Forgotten system PIN.
¥ Reset the system PIN to 0000 (¢ page 28).
The other party cannot hear you.
The handset is "muted".
¥ Unmute the microphone (¢ page 21).
The caller's number is not displayed.
1. Calling Line Identification (
CLI) is not enabled for the caller.
¥ The caller should ask his network provider to enable Calling Line Identification (CLI).
2. Calling line display
(CLIP) is not supported by the network provider or has not been enabled for you.
¥ Have calling line display (CLIP) enabled by your network provider.
3. Your telephone is connected via a PABX or a router wit
h an integrated PABX (gateway) that does not trans-
mit all information.
¥ Reset the system: Briefly pull out the power plug. Reinsert the plug and wait until the device restarts.
¥ Check the settings on the PABX and activate phone number display, if necessary. To do this, search for
terms such as CLIP, calling line identification, phone number identification, caller ID etc. in the sys-
tems user guide or ask the system manufacturer.
You hear an error tone when keying an input.
Action has failed/invalid input.
¥ Repeat the process.
Read the display and refer to the user guide if necessary.
You cannot listen to messages
on the network mailbox.
Your PABX is set to pulse dialling.
¥ Set your PABX to tone dialling.
No time is specified for a message in the call list.
Date/time are not set.
¥ Set the date/time (¢ page 9).
The answer machine announces "PIN is
incorrect" during remote operation.
1. You have entered the wrong system PIN.
¥ Enter the system PIN again.
2. The system PIN is still set to 0000.
¥ Set the system PIN to something other than 0000 (¢ page 28).
The answer machine is not r
ecording any messages/has switched to the advisory message.
The memory is full.
¥ Delete old messages.
¥ Play back new messages and delete.
68


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-gigaset-s820a

Reset search

  • Is it possible to lower the on/off ring on my dect gigaset s820.It is far to high!! Submitted on 1-11-2019 at 11:43

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset S820A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset S820A in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset S820A

Siemens Gigaset S820A User Manual - German - 87 pages

Siemens Gigaset S820A User Manual - German - 1 pages

Siemens Gigaset S820A User Manual - Dutch - 91 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info