490178
37
Zoom out
Zoom in
Previous page
1/83
Next page
35
Gigaset S820-S820A / LUG - AU-NZ en / A31008-M2404-C401-1-7619 / Register-HS.fm / 11/29/12
Template CES 131x195 1col, Version 1, 12.03.2012
Multiple handsets
Multiple handsets
Registering handsets
You can register up to six handsets to your base. You must initiate registration of the handset on
both the base and on the handset. Both must occur within 60 seconds.
¤ On the base: Press and hold (at least 3 seconds) the registration/paging key.
¤ On the S820H handset (for other handsets see "Notes"):
¤ Touch Register
or
Menu key v
¤Settings menu page ¤É HS + Base ¤Register
This creates a connection to the base, but it may take some time.
¤If necessary, enter the system PIN (default: 0000) ¤Confirm the PIN withè.
Successful registration is shown on the display
. Adjust the handset's setting using the Settings
menu item (
¢ page 60).
Using the handset on multiple bases
Your handset can be registered on up to four bases.
The active base is the last one your handset was registered with. The other bases are stored in
the
list of available bases.
You can change the allocation to a base m
anually at any time. Alternatively, you can set the
handset so that it selects the base with the best reception (Best Base) as soon as the connection
to the current base is lost.
Menu key v
¤Settings menu page ¤É HS + Base ¤Connect to Base
¤Touch the selection icon for the desired base or touch Best Base (
´
=selected)
Changing a base name or deleting a base
Menu key v ¤Settings menu page ¤É HS + Base ¤Connect to Base
¤Touch the name field for the desired base
¤Touch the name field and change the name
Or
¤Delete Base
Please note
u If six handsets are already registered with the base (all internal numbers occupied) then
the handset assigned internal number 6 is replaced by the new handset. If this attempt
is not successful, e.g. because this handset is being used to make or receive a call, the
message No free internal number is displayed.
In this case, de-register another handset that is no longer required and repeat the regis-
tration procedure.
u You should start the registr
ation procedure for other Gigaset handsets and handsets of
other GAP-enabled devices in accordance with the respective operating instructions.
37


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-gigaset-s820a

Reset search

  • Is it possible to lower the on/off ring on my dect gigaset s820.It is far to high!! Submitted on 1-11-2019 at 11:43

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset S820A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset S820A in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset S820A

Siemens Gigaset S820A User Manual - German - 87 pages

Siemens Gigaset S820A User Manual - German - 1 pages

Siemens Gigaset S820A User Manual - Dutch - 91 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info