490178
30
Zoom out
Zoom in
Previous page
1/83
Next page
28
Gigaset S820-S820A / LUG - AU-NZ en / A31008-M2404-C401-1-7619 / settings.fm / 11/29/12
Template CES 131x195 1col, Version 1, 12.03.2012
Changing phone settings
Activating/deactivating repeater
The Gigaset repeater can be used to increase the reception range between your Gigaset handset
and the base. To do so, you must activate repeater operation. During activation, calls currently
taking place via the base are cancelled.
Menu key v
¤Settings menu page ¤ÊSystem ¤Repeater Mode on/off
After activating or deactivating the repeater, switch your handset off and on again (
¢ page 15).
Changing the system PIN
Menu key v ¤Settings menu page ¤ÊSystem ¤Security ¤System PIN ¤Enter
current PIN (factory setting: 0000)
¤è ¤Enter new system PIN (4 digits; 0 - 9) ¤è
Resetting the system PIN
If you have forgotten your system PIN, you can reset it to 0000. If you do this, all the base set-
tings ar
e reset and all the handsets are de-registered!
¤Remove the power cable from the base.
¤Press and hold the registration/paging key on the base (¢ page 2) and at the same time
reconnect the power cable to the base.
¤Press and hold the registration/paging key for at least 5 seconds.
Restoring the phone to the factory settings
You can reset individual changes to the base and handset separately.
The following are not af
fected by the reset:
u Date and time
u Settings for the configurable page
u Registrations of handsets to the base a
nd the current base selection
u System PIN
u Entries in the calendar and in the contacts
u Redial list
u Stored external and internal destination numbers for the baby phone (F
orward alarm to is
reset to External),
u Destination number for call divert
Resetting the handset (Handset Rese
t) deletes your audio and display settings.
Resetting the base (Ba
se Reset) resets the settings for ECO DECT, SMS, answer machine, system
settings and the internal names of handsets, and also deletes call/answer machine lists.
Resetting the handset/base
Menu key v ¤Settings menu page ¤ÊSystem ¤Resets ¤Handset Reset/Base Reset
¤For Base Reset: Enter the system PIN è ¤Answer Ye s to the security prompt
Please note
u If you are using a repeater, ECO DECT settings (¢ page 29) are not available.
u You can register up to 6 Gigaset repeaters.
30


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-gigaset-s820a

Reset search

  • Is it possible to lower the on/off ring on my dect gigaset s820.It is far to high!! Submitted on 1-11-2019 at 11:43

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset S820A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset S820A in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset S820A

Siemens Gigaset S820A User Manual - German - 87 pages

Siemens Gigaset S820A User Manual - German - 1 pages

Siemens Gigaset S820A User Manual - Dutch - 91 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info