300927
39
Zoom out
Zoom in
Previous page
1/58
Next page
38
Using a handset as a Room Monitor
Gigaset S79H / en / A31008-M2151-R201-2-SM19 / registr_sett.fm / 06.05.2010
Version 4.1, 21.11.2007
Deactivating the wake-up call/
repeating after a pause (Snooze
mode)
Prerequisite: A wake-up call is sounding.
§OFF§ Press the display key. The wake-
up call is deactivated.
or
§Snooze§ Press the display key or any key.
The wake-up call is deactivated
and then repeated after 5 min-
utes. After the second repetition
the wake-up call is deactivated
completely.
Using a handset as a
Room Monitor
If the Room Monitor is activated, a previ-
ously saved destination number is called as
soon as a set noise level is reached. You can
save an internal or external number in your
handset as the destination number. All of
the handset keys are deactivated, with the
exception of the display keys.
The Room Monitor call to an external
number is terminated after approximately
90 seconds. The Room Monitor call to an
internal number (handset) is terminated
after approximately 3 minutes (depending
on the base). When the Room Monitor is
activated, all keys are locked except the end
call key. The handset's speaker is muted.
When the Room Monitor is activated, incom-
ing calls to the handset are indicated with-
out a ringtone and are only shown on the
screen. The display and keypad are not illu-
minated and Advisory Tones are also turned
off.
If you accept an incoming call, the Room
Monitor is suspended for the duration of the
call, but the function remains activated.
If you deactivate then reactivate the hand-
set, the Room Monitor remains activated.
Activating the Room Monitor and
entering the destination number
v ¢ É ¢ Room Monitor
¤ You can enter data in the following fields:
Activation:
Select On to activate.
Alarm to:
Select Internal or External.
External number: Select the number
from the Directory (press display key
ö)
or enter it manually.
Internal number: Select display key
§Change§ ¢ . Select handset or Call All to
call all registered handsets
¢ §OK§.
In idle status, the destination number or
the internal destination number is dis-
played.
Sensitivity:
Select noise level sensitivity (Low or
High).
¤ Press §Save§ to save the settings.
When the Room Monitor function is acti-
vated, the idle display appears as shown
below:
Warning!
u Always check the operation of the
Room Monitor before use. For exam-
ple, test its sensitivity. Check the
connection if you are diverting the
Room Monitor to an external
number.
u When the function is switched on, the
handset's operating time is consider-
ably reduced. If necessary, place the
handset in the charger. This ensures
that the battery does not run down.
u Ideally the handset should be posi-
tioned 1 to 2 metres away from the
baby. The microphone must be
directed towards the baby.
u The connection to which the Room
Monitor is diverted must not be
blocked by an activated Answering
Machine.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset s79h at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset s79h in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset s79h

Siemens gigaset s79h User Manual - German - 65 pages

Siemens gigaset s79h User Manual - Dutch - 61 pages

Siemens gigaset s79h User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info