301097
55
Zoom out
Zoom in
Previous page
1/69
Next page
54
Appendix
Gigaset S680 / IM-NORD EN / A31008-M1901-R201-1-SM19 / appendix.fm / 1.10.08
Version 4, 16.09.2005
Base Search flashes in the display.
The handset is set to Best Base and no base sta-
tion is turned on or within range.
¥ Move the handset closer to the base station.
¥ Check the base station's mains adapter
(page 7).
Handset does not ring.
1. The ringer tone is deactivated.
¥ Activate the ringer tone (page 43).
2. Call diversion set to All Calls.
¥ Deactivate call diversion (page 17).
You cannot hear a ringer/dialling tone from
the fixed network.
The phone cord supplied has not been used or
has been replaced by a new cord with the
wrong jack connections.
¥ Please always use the phone cord supplied
or ensure that the jack connections are cor-
rect when purchasing from a retailer
(page 7).
Error tone sounds after system PIN prompt.
You have entered the wrong system PIN.
¥ Reset the system PIN to 0000 (page 49).
Forgetting the system PIN.
¥ Reset the system PIN to 0000 (page 49).
Call charges are not displayed.
1. Your network provider does not support this
feature.
2. There are no metering pulses.
¥ Ask your network provider to transmit
the metering pulses.
The other party cannot hear you.
You have pressed the
u (INT) key. The hand-
set is "muted".
¥ Activate the microphone again (page 16).
The number of the caller is not displayed
despite CLIP.
Calling Line Identification is not enabled.
¥ The caller should ask the network provider
to release Calling Line Identification (CLI).
You hear an error tone when keying an input
(a descending tone sequence).
Action has failed/invalid input.
¥ Repeat the operation.
Watch the display and refer to the user
guide if necessary.
You cannot listen to messages on the net-
work mailbox.
Your phone system is set for pulse dialling.
¥ Set your phone system to touch tone dial-
ling.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset s680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset s680 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset s680

Siemens gigaset s680 User Manual - German - 86 pages

Siemens gigaset s680 User Manual - Dutch - 80 pages

Siemens gigaset s680 User Manual - French - 86 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info