301097
50
Zoom out
Zoom in
Previous page
1/69
Next page
49
Base station settings
Gigaset S680 / IM-NORD EN / A31008-M1901-R201-1-SM19 / registr_sett.fm / 1.10.08
Version 4, 16.09.2005
Setting your own area code
In order to transfer phone numbers
(for example vCard), it is essential that
your area code (international and local
area code) is saved on the phone.
Some of these numbers are already pre-
set.
v
¢ Ð ¢ Handset ¢ Area Codes
Check that the (pre)set area code is cor-
rect.
¤ Change multiple line input:
q Select/change input field.
r Navigate in the input field.
X If necessary, delete number:
press the display key.
~ Enter number.
§Save§ Press the display key.
Example:
Restoring the handset to the
factory settings
You can reset any individual settings and
changes that you have made. Entries in
the directory, the call-by-call list, the call
history, the SMS lists and the handset's
registration to the base station as well as
the content of My stuff are retained.
v
¢ Ð ¢ Handset ¢ Reset Handset
§Yes§ Press the display key.
a Press and hold (idle status).
Base station settings
The base station settings are carried out
using a registered Gigaset S68H handset.
Protecting against unauthorised
access
Protect the system settings of the base
station with a PIN known only by you.
The system PIN must be entered when,
for example, registering/deregistering a
handset to/from the base station or when
restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN set
on the base station (default setting: 0000)
to a 4-digit PIN known only by you.
v
¢ Ð ¢ Base ¢ System PIN
~ Enter the current system PIN
and press
§OK§.
~ Enter new system PIN. For
security the PIN is shown as
four stars (
****
).
s~ Jump to the next line, re-enter
new system PIN and press
§OK§.
a Press and hold (idle status).
Resetting the system PIN
If you have forgotten your system PIN you
can reset the base station to the original
code 0000:
Disconnect the power cord from the base
station. Hold down the registration/pag-
ing key on the base station while recon-
necting the power cable to the base sta-
tion. Release the key after a while.
The base has now been reset and the sys-
tem PIN 0000 set.
Area Codes
International code:
00 - 35
Local area code:
0 - [ 814 ]
X
Save
Please note:
All handsets are deregistered and must be re-
registered.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset s680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset s680 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset s680

Siemens gigaset s680 User Manual - German - 86 pages

Siemens gigaset s680 User Manual - Dutch - 80 pages

Siemens gigaset s680 User Manual - French - 86 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info