37524
116
Zoom out
Zoom in
Previous page
1/137
Next page
112
Appendix
Gigaset S100 /S150 / englisch / A31008-S100-J102-1-7619 / appendix.fm / 23.06.2003
… (if several handsets are
used) the handset in the base
station does not charge?
A handset cannot be charged
while a telephone call is being
made.
Use an additional charging
unit.
... the handset or the base sta-
tion S 150 does not ring?
The ringer tone is switched off.
Call diversion has been set to All
Calls.
Activate the ringer tone of the
handset (page 96) or the base
stationS 150.
Switch off call diversion
(page 2).
... I cannot hear any ringer/
dialling tone?
You have changed the telephone
cord on your Gigaset.
Ensure, when purchasing a
new cord, that it has the cor-
rect pin assignment (page 8).
... the units/call charges are
not displayed?
There are no metering pulses. Ask your network provider to
transmit the metering pulses.
... the call charge is not dis-
played?
The charge per unit set to
"00.00".
Set call charge per unit
(page 4).
... the other person cannot
hear me?
You have pressed the
u (INT)
key. This "mutes" the handset.
Re-activate the microphone
(page 22).
... the incoming call number is
not displayed although CLIP is
set?
The calling line identification is
not enabled.
The caller should permit call
line identification (CLI) by his
or her telephone company.
... the error beep is heard
while making an entry (rising
tone sequence)?
The action has failed or the input
is incorrect.
Repeat the procedure; read the
display message and, if neces-
sary, refer to the operating
instructions.
… I cannot listen to the net-
work mailbox?
Your PABX system is set to dial
pulsing.
Switch the PABX system to tone
dialling (page 110).
... an answering machine
message does not have a time
stamp?
The date/time are not set. Set the date/time (page 15).
... the answering machine
says ”PIN is incorrect” during
remote operation?
The system PIN entered is incor-
rect or still set to 0000.
Re-enter the system PIN or set a
PIN other than 0000
(page 102).
... the answering machine
does not record any messages
or has automatically switched
to announce only mode?
Its memory is full. Delete old messages.
Play back and delete new mes-
sages.
... voice command does not
work?
You are too far from the handset:
The background noise is too
loud.
Reduce the distance to handset
to about 20 cm.
Record your voice patterns in
quieter surroundings.
What has happened if ... Possible cause Possible solution
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset S100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset S100 in the language / languages: English as an attachment in your email.

The manual is 5,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset S100

Siemens Gigaset S100 User Manual - German - 139 pages

Siemens Gigaset S100 User Manual - Dutch - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info