37524
86
Zoom out
Zoom in
Previous page
1/137
Next page
82
Registering and de-registering handsets
Gigaset S100 /S150 / englisch / A31008-S100-J102-1-7619 / registration.fm / 23.06.2003
Registering and de-registering handsets
You can register up to six handset at your base station.
An unregistered S 1 handset is registered automatically. Handsets of the Gigaset 1000,
2000, 3000, 4000 families and non-Siemens handsets must be registered manually.
An S 1 handset can be registered at up to four base stations.
Automatic registration: Gigaset S 1 to Gigaset S 100 or S 150
Automatic registration is possible for any handset that is not registered at a base station.
To "introduce" your handset, place it in the base station with the display facing
upward. The registration process takes about a minute. During registration the display
shows Regstr.Procedure and it flashes Base 1. The next unassigned internal number
(1–6) is automatically assigned to the handset. After successful registration, the dis-
play shows this internal number, e.g. "INT 1". This means that the handset has been
assigned the first internal number. If all the internal numbers (1 – 6) have already been
assigned (six handsets have been registered at the base station, number 6 will be over-
written if this handset is idle).
Manual registration: Gigaset S 1 to Gigaset S 100 or S 150
You have to initiate registration at the handset and at the base station.
1. At the handset
After entering the system PIN, Base 1 flashes in the display, for example.
2. At the base station
i
Automatic registration is only possible if the base station you want to
register the handset at is not being used for a call.
You can assign a different internal number (page 86) or name
(page 85) to a registered handset.
Open the menu.
[______________________________________________]
H/Set Settings
Select the menu item and confirm.
[______________________________________________]
Register H/Set
Select the menu item and confirm.
[______________________________________________]
Base 1
Select the base station (1–4) and confirm,
e.g. Base 1.
Enter the base station system PIN (factory setting:
0000) and confirm.
OK
OK
OK
OK
Press the Register/Paging key on the base station
(page 64) , until you hear a signal tone (only S 150)
(about 3 seconds). This starts the registration proce-
dure.
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset S100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset S100 in the language / languages: English as an attachment in your email.

The manual is 5,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset S100

Siemens Gigaset S100 User Manual - German - 139 pages

Siemens Gigaset S100 User Manual - Dutch - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info