37524
14
Zoom out
Zoom in
Previous page
1/137
Next page
10
Preparing the telephone
Gigaset S100 /S150 / englisch / A31008-S100-J102-1-7619 / starting.fm / 23.06.2003
Placing the handset into the base station and charging the batteries
If you place the handset on the base station, it automatically registers. This can be done
as follows:
1. Place the handset in the base station with the display facing upward.
2. Wait until the handset has automatically registered with the base station (page 82):
This takes about a minute. During registration the display shows Regstr.Proce-
dure and it flashes Base 1. After registration you will see "INT 1" in the display,
which means that the handset has been assigned the first internal number. You can
change the handset name "INT 1" (page 85).
3. Leave the handset in the base station to charge the batteries, because they are not
charged at the factory. The charging is indicated in the upper right of the display
where the charging status = flashes:
If automatic registration is interrupted, you can register the handset manually as
described from page 82. There is a table of the most important questions and answers
to help you (page 111).
The battery charging status is correctly displayed only after uninterrupted charging/dis-
charging. Therefore you should not remove the batteries unnecessarily or terminate the
charging process early.
Note:
Your Gigaset is now ready for operation. The Gigaset S 150 answering machine is
already activated with the standard announcement. All you have to do is set the date
and time, so that the time of incoming calls and messages (only S 150) can be noted
correctly (page 15).
= Batteries flat V Batt.
2
/
3
charged
e Batteries
1
/
3
charged U Batt. fully charged
i
If you want to register further handsets, please turn to page 82.
W
When charging the batteries for the first time, we recommend an uninter-
rupted loading time of five hours, regardless of the charging status icon!
The battery charge capacity decreases after a few years for technical rea-
sons.
i
Once the initial charging operation is completed you can replace your
handset in the base station after each call. Charging is controlled
electronically. This ensures optimum charging.
The batteries heat up during charging. This is normal and not
dangerous.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset S100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset S100 in the language / languages: English as an attachment in your email.

The manual is 5,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset S100

Siemens Gigaset S100 User Manual - German - 139 pages

Siemens Gigaset S100 User Manual - Dutch - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info