472667
47
Zoom out
Zoom in
Previous page
1/212
Next page
17
Using several handsets
Gigaset S1 colour / englisch / A31008-M1573-R111-1-6Z19 / start_guide_time.fm / 13.04.2004
.
Activating the room monitor function and entering the 'call to' number for
the first time
Step 1: Open the input field: v; s é ; Room Monitor .
Step 2: Activate room monitor: r (in the Room M.: line, select On);
Step 3: Enter the destination number: s (to the next line); Edit;
Enter internal number: INT s (select handset) ; or:
Enter external number: ~; (open menu); Save Entry ;
Step 4: Set the sensitivity: if necessary press s (to the next line); r;
Save;
The room monitor function is now activated.
Once the room monitor is activated, switch directly to the room monitor setting with v
(open menu).
Deactivating the room monitor
You can deactivate the room monitor remotely (depending on the base). Take the call
from the room monitor and press O R. The room monitor function will deactivate
around 90 seconds after the call ends. The room monitor will make no further calls. The
other room monitor functions on the handset (e.g. no ringer) will remain activated until
you press the display key
Off on the handset that is in the baby's room.
Setting the Walk and Talk mode
The Walk and Talk function allows two handsets (maximum range 300 metres) to call
each other no matter how far they are from the base.
Precondition:
Both handsets have been registered to the same base (recommended for the room
monitor function) or
Both handsets are registered to different bases and both are set to Best Base
(page 7) or
One of the handsets is not registered to any base and the registered handset is set
to Best Base or
Neither handset is registered to a base.
W
Always check the settings of the room monitor before you leave
home, e.g. sensitivity and phone line.
i
The room monitor function severely curtails the handset's operating
time. If necessary you should place the handset which is near the baby in
the charger to ensure that the battery does not run down.
The room monitor function can also be used in Walk and Talk mode.
i
To reactivate the room monitor function with the same telephone
number, you must turn on the activation again and save with
Save.
OK OK
OK
à OK
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset S1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset S1 in the language / languages: German as an attachment in your email.

The manual is 4,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset S1

Siemens Gigaset S1 User Manual - English - 106 pages

Siemens Gigaset S1 User Manual - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info