300373
282
Zoom out
Zoom in
Previous page
1/303
Next page
101
Appendix
C1-C2 isdn / englisch / A31008-X150-B103-1-7619 / appendix.fm / 19.11.2003
Appendix
Care
Wipe the base and handset with a damp cloth (use no solvent) or an antistatic cloth.
Never use a dry cloth. This can cause static.
Contact with liquid
If the handset should come into contact with liquid, on no account switch the device
on. Remove all batteries immediately.
Allow the liquid to drain out of the device, and then pat all parts of the device dry.
Keep the handset with the batteries removed in a warm, dry place for at least 72 hours.
In many cases, you will then be able to use it again.
Questions and answers
If you have any questions about the use of your phone, you can contact us 24/7 at
www.my-siemens.com/customercare
. You will find the most frequently asked ques-
tions and answers below.
!
What has happened
when …
Possible cause Possible solution
… the display is blank? The handset is not switched on.
The batteries are flat.
Press the end call key a
for about 2 seconds.
Charge or replace the batteries
(page 9).
… the handset fails to respond
to a key press?
The keypad lock is activated. Press the hash key
R
for about 2 seconds to deacti-
vate the lock (page 10).
Base 1 or Searching for
Base, for example, is flashing
on the screen?
The handset is outside the range
of the base.
The handset is not registered.
The base is not switched on.
Move the handset nearer to the
base.
Register the handset
(page 14).
Check the power connector at
the base.
… the handset does not ring? The ringer is switched off. Switch on the ringer in the
handset (page 92) or the base
S150.
… the incoming call number is
not displayed even though
CLIP is set?
Calling Line Identification is
blocked.
The caller must ask his network
provider to enable the identifi-
cation of his number (CLI).
282


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset s1 colour at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset s1 colour in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset s1 colour

Siemens gigaset s1 colour User Manual - German - 302 pages

Siemens gigaset s1 colour User Manual - Dutch - 37 pages

Siemens gigaset s1 colour User Manual - French - 321 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info