Manual Siemens gigaset m2 professional (page 30 of 158) (English)

301495

Zoom out

Zoom in

1/158

Putting the handset into service

Procedure

1. Remove the attachment clip (if fitted)

Press the tongue on the attachment clip (1) and pull the attachment clip off

the stud (2).

2. Open the battery compartment

1. Use a suitable Allan key to loosen and remove the battery cover

screw (1).

2. Insert a suitable screwdriver into the recess between the housing and

the battery cover, twist it, and then raise the battery cover (2).

3. Slide the battery cover downwards away from the housing (3).

3. Insert/replace battery pack and memory card

1. Remove any old battery packs (1). If necessary, slide the memory card

out of the retainer and remove it (2). Lift the memory card out of the

positioning device.

2. Insert the memory card and slide it into the retainer until it snaps into

place (3). Make sure to line up the notched corner when positioning the

memory card in the retainer.

3. Insert the new battery pack [at a slant, head first and with the contacts

facing down] (4). Then press it down into the compartment until the

battery pack’s positioning clip firmly snaps into place (5).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset m2 professional in the language / languages: English as an attachment in your email.

The manual is 4,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset m2 professional

Siemens gigaset m2 professional User Manual - Dutch - 158 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens gigaset m2 professional Manual

Product: