301495

Siemens gigaset m2 professional Manual

2
Zoom out
Zoom in
Previous page
1/158
Next page
Safety notes
II
Safety notes
Using the Gigaset M2 Ex professional handset in po-
tentially explosive working environments
This handset satisfies the requirements of the ATEX directive and meets
the required EN and IEC standards (see the appendix in the operating man-
ual). See also the notes in the declaration of conformity.
The Gigaset M2 Ex professional was designed for use in potentially explo-
sive working environments (Ex zones) and in compliance with fire preven-
tion regulations. Local and operational factors may lead to an explosive at-
mosphere in an Ex zone. Therefore, please note the following Ex safety
notes:
Handset
• The handset may only be operated in Ex zones where it is certi-
fied. Refer to the appendix in the operating manual, the device
identification and the EC type examination certificate. A copy of
the prototype verification certificate ZELM 08 ATEX 0379 X is in
the appendix of this operating manual.
• Users must check the handset for damage and verify that it is
operating correctly before using it in the Ex zone. A damaged
handset, or a handset that is not fully functional, may not be
brought into or used in the Ex zone.
• The following requirements must be met to satisfy the Ex pro-
tection and IP rating IP 65 (casing protection) in an Ex zone:
– The rubber seal must always be inserted in the handset’s
charging socket.
– The battery compartment seal must be inserted (see the
"Putting the handset into service" section of the operating
manual).
– The cover of the battery compartment must be tightly
screwed on.
• Deactivate the handset immediately and remove it from the Ex
zone if the following situations occur:
– You notice damage to the handset.
– If liquids have seeped into the handset.
• Repair a damaged handset immediately.
• Only Siemens service employees with Ex zone training and au-
thorisation should repair and service the handset.
• When swapping out a malfunctioning device/battery, the techni-
cian must return the malfunctioning device/battery to the ma-
nufacturer while specifying the customer data.
• Inappropriate use of the telephone will result in revocation of its
certification for use in Ex zones.
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset m2 professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset m2 professional in the language / languages: English as an attachment in your email.

The manual is 4,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset m2 professional

Siemens gigaset m2 professional User Manual - Dutch - 158 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info