504672
49
Zoom out
Zoom in
Previous page
1/55
Next page
What happens if...
û
A
47
Back
Problems with the hardware (PC, modem, ISDN-TA.)
Fault Cause Solution
PABX
(telecommunications
system) cannot be configured
via a Gigaset M101 Data.
The PABX configuration is not
compatible with AT Hayes.
Configure Gigaset M101 Data
in direct mode (e.g. with
9600,8,N,1).
At the system, the baud rate
conversion is switched with an
internal command string that is
not compatible with AT Hayes.
None.
ELSA TagGo2000 / ISDN
con-
figuration not possible.
---------------------------- Configure the modem with a di-
rectly connected serial cable.
The
ELSA TanGo 2000
termi-
nal adapter can be used under
AOL
.
No appropriate modem profile
is available.
Tests have shown that an oper-
ational X.75 connection is set
up with the modem profile "IS-
DN ELSA TLV34 X.75 64.000".
Heliowatt
timers cannot be
programmed.
Incorrect protocol set. Set Gigaset M101 Data to 300
bps direct connection. Data-
flow setting: none
The
ACER ISDN T30
terminal
adapter cannot be operated
under
AOL
with the initialisa-
tion string specified in the man-
ual.
The initialisation string is incor-
rect.
The "/" character must be re-
placed by a "~".
The Hagenuk
Speed Dragon
terminal adapter cannot be
used with the RVS-COM soft-
ware.
Commands that are not com-
patible with Hayes are trans-
ferred with the connection.
Set Gigaset M101 Data to di-
rect connection 115000 bps,
See "PC-PC direct cable con-
nection: via RS232/V.24 in-
terface" on page 34
Faxes are distorted when sent
with
ELSA Microlink 56k
and
WinFax 8.0 software.
Incorrect driver set for voice
functions under WinFax 8.0.
During installation, WinFax 8.0
requires a modem driver for
voice functions. The Generic
driver /Rockwell Fax/voice driv-
er is to be used here according
to ELSA AG.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset M101 Data at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset M101 Data in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset M101 Data

Siemens Gigaset M101 Data User Manual - German - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info