504672
32
Zoom out
Zoom in
Previous page
1/55
Next page
LEDs and buttons
û
A
30
Back
Notes on installation and operation
Place of installation
There must be a 220/230 V AC and 50 Hz power socket nearby.
The Gigaset M101 Data should not be installed in the immediate vicinity
of other electronic devices, such as hi-fi systems, office equipment or mi-
crowave ovens, otherwise there is a risk of mutual interference.
Place the Gigaset M101 Data unit on a level, non-slip surface. The device
feet do not leave any unsightly marks. However, in view of the many dif-
ferent varnishes and polishes currently used for furniture, the possibility
of marks being left cannot be ruled out.
Radio communication between base and portable part is based on the
DECT standard. The Gigaset M101 Data complies fully with the relevant
European directives. Should you nevertheless experience sound or pic-
ture distortion with your satellite signal receiving equipment, please get in
touch with your dealer to have it tested for shielding faults.
Depending on the ambient conditions, the maximum range for a radio
connection between the local adapter and the remote adapter is approx.
300 m outdoors and approx. 50 m indoors.
Temperature and ambient conditions
Gigaset M101 Data is designed for operation in protected rooms with a
temperature range from +5°C to +45°C and 20% to 75% relative humid-
ity.
Do not install the Gigaset M101 Data unit in damp environments, such as
a bathroom or laundry room. Do not expose it to direct sunlight or other
heat sources, such as radiators.
Why set an operating mode? Technical background
Configuration must always be performed for both M101 units on a V.24
link.
Serial interfaces are more than connectors. They have an integrated da-
taflow control, control lines, data lines and an adjustable speed function.
Serial interface are used to transport data in various formats.
Modems are usually controlled with AT commands or proprietary proto-
cols that they receive via their serial interface. On the basis of these com-
mands, modems can recognise the data format and speed at which the
data is transferred. The automatic recognition of transmission parameters
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset M101 Data at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset M101 Data in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset M101 Data

Siemens Gigaset M101 Data User Manual - German - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info