301329
44
Zoom out
Zoom in
Previous page
1/80
Next page
42
Operating the answering machine of the Gigaset E495 base station
Gigaset E490/E495 / GBR / A31008-M2105-L101-2-7619 / answering_m.fm / 15.05.2013
Version 4, 16.09.2005
Setting up the answering
machine
The answering machine has already been
preset at the factory. Make individual set-
tings using the handset.
Ring delay/cost saving function for
remote operation
You can set when you want the answering
machine to accept a call.
The options are: No delay, after 10 sec., 18
sec. or 30 sec. and the cost-saving setting
Automatic.
In Automatic mode, the following applies
for ring delay:
u If there are no new messages, the answer-
ing machine answers a call after 18 sec-
onds.
u If new messages are present, the answer-
ing machine accepts a call after 10 sec-
onds.
When operating remotely you can tell after
approx. 15 seconds that there are no new
messages (otherwise the answering
machine would already have accepted your
call). There will be no call charges if you hang
up now.
v
¢ Ð ¢ Voice Mail ¢ Ring Delay
r Select No delay / 10 sec. / 18
sec. / 30 sec. / Automatic.
§Save§ Press the display key.
a Press and hold (idle status).
Please note:
You can configure your telephone so that
the first ring is suppressed on all calls
(
¢ page 36). The time set for ring delay
therefore does not indicate how long the
phone rings before the answering machine
accepts the call.
Setting the recording time
You can set the maximum recording time of
a message. The options are: 1, 2, 3 mins or
Maximum.
v
¢ Ð ¢ Voice Mail ¢ Message
Length
r Select the recording time.
§Save§ Press the display key.
Setting the recording quality
Set the quality you require for your record-
ings. The options are: Long Play, High, Excel-
lent. If the quality is higher, the maximum
recording time is reduced.
v
¢ Ð ¢ Voice Mail ¢ Recording
Quality
r Select the recording quality.
§Save§ Press the display key.
Resetting fast access for the
answering machine using
key 1
The integrated answering machine has
already been preset for fast access at the fac-
tory. However, if you have set the network
mailbox for fast access (
¢ page 44), you can
reset this setting.
v
¢ Ð ¢ Voice Mail ¢ Set Key 1
Answer Machine / Network Mailb.
Select and press
§OK§.
a Press and hold (idle status).
After you have selected the network mailbox
or the answering machine, press and hold
key . You will be connected directly.
The setting for fast access applies to all
Gigaset E49H handsets.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset e495 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset e495 in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset e495

Siemens gigaset e495 User Manual - German - 84 pages

Siemens gigaset e495 User Manual - Dutch - 80 pages

Siemens gigaset e495 User Manual - French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info