301329
40
Zoom out
Zoom in
Previous page
1/80
Next page
38
Operating the answering machine of the Gigaset E495 base station
Gigaset E490/E495 / GBR / A31008-M2105-L101-2-7619 / answering_m.fm / 15.05.2013
Version 4, 16.09.2005
Operating the answering
machine of the Gigaset
E495 base station
You can operate the answering machine that
is integrated in the base station via the
handset or via remote operation (other
phone/mobile phone). You can only record
your own announcement messages using
the handset.
Announcement mode
You can use the answering machine in two
different modes.
u In Ans. & Record mode, the caller hears
the announcement and can then leaves a
message.
u In Announce Only mode, the caller hears
your announcement but cannot leave a
message.
Operation via the handset
The handset loudspeaker activates auto-
matically if you receive an acoustic prompt
or message while operating. You can switch
it off with the speaker key d.
Activating/deactivating the
answering machine
v ¢ Ð ¢ Voice Mail ¢ Ans Machine
(=on)
When you switch the answering machine
on, the remaining memory time is
announced. If the time has not yet been set
(
¢ page 13), an appropriate announce-
ment is made. The × icon appears in the
display.
The phone is supplied with pre-recorded
announcements for answer and record
mode and for answer only mode. If a per-
sonal announcement has not been
recorded, the relevant pre-recorded
announcement is used.
Recording announcement/
announce only
v ¢ Ð ¢ Voice Mail
¢ Announcements ¢Record
Announce / Record Anc Only
§OK§ Press the display key to start the
recording.
You hear the ready tone (short tone).
¤ Now speak your announcement (at least
3 secs.).
§End§ Press the display key to end the
recording.
Cancel the recording with a or .
Restart the recording with
§OK§.
After recording, the announcement is
played back for you to check. You can re-
record the announcement with
§New§.
Please note:
u Recording ends automatically if the max-
imum recording time of 3 minutes is
exceeded or there is a break in speech for
more than 2 seconds.
u If you cancel the recording, the pre-
recorded announcement will be used
again.
u If the answering machine's memory is
full, it will switch to Announce Only
mode.
¤ Delete old messages and the answer-
ing machine will automatically switch
back to Ans. & Record mode. Repeat
recording if required.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset e495 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset e495 in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset e495

Siemens gigaset e495 User Manual - German - 84 pages

Siemens gigaset e495 User Manual - Dutch - 80 pages

Siemens gigaset e495 User Manual - French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info