298819
36
Zoom out
Zoom in
Previous page
1/46
Next page
35
Operating the base station on the PABX
Gigaset E365 / GBR / A31008-M1806-L101-1-7619 / T-NetBox_SAG-registration.fm / 07.10.2008
Version 4, 16.09.2005
Changing ringtones
u Volume:
You can choose between five volumes,
see page 33. Select "0" to deactivate
the ringtone on the base station.
u Melody:
You can set a ringtone melody for
external calls, see page 33.
§Menu§ ¢ Settings ¢ §OK§ ¢ Base ¢ §OK§
¢ Audio Settings ¢ §OK§ ¢ Ringer Volume /
Ringer Melody
¢ §OK§
For how to adjust the settings, see
page 33.
Restoring the base station to
factory settings
When the settings are restored all hand-
sets are de-registered. Each individual set-
ting is restored. Only the date and time are
retained.
§Menu§ ¢ Settings ¢ §OK§ ¢ Base ¢ §OK§
¢ Base Reset ¢ §OK§
Operating the base station
on the PABX
The following settings are only needed
when your PABX requires them. Please
refer to the user guide for your PABX.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
Changing the dialling mode
§Menu§ ¢ LNO11 ¢ Enter dig-
its for dialling mode: Q = Dual-tone mul-
tifrequency dialling (DTMF); 1 =Pulse
dialling (PD)
¢§OK§
Switching temporarily to dual-tone
multifrequency dialling (DTMF)
If your PABX is still using pulse dialling
(PD) but tone dialling is required for a con-
nection (e.g. to play back the network
mailbox), you have to switch temporarily
to tone dialling.
Requirement: You are currently conduct-
ing a call or have already dialled an exter-
nal number.
Press the asterisk key P. Tone dialling is
activated for this connection only.
Setting the flash time
§Menu§ ¢ LNO12 ¢ Enter dig-
its for flash time
: Q =80ms;
1 =100ms; 2 =120ms;
I = 180 ms; 4 = 250 ms;
5 =300ms; L = 600 ms;
M =800ms
¢ §OK§
Changing pause after line seizure
You can set the length of the pause
inserted between pressing the talk key c
and sending the phone number.
§Menu§ ¢ LNO1O ¢ Enter digits
for the current pause length: 1 = 1 sec.;
2 = 3 sec.; I = 7 sec. ¢ §OK§.
Changing the pause after the recall key
§Menu§ ¢ LNO14 ¢ Enter the
digits for the current pause length:
1
= 800 ms; 2 = 1600 ms;
I = 3200 ms ¢ §OK§
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset e365 duo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset e365 duo in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset e365 duo

Siemens gigaset e365 duo User Manual - German - 46 pages

Siemens gigaset e365 duo User Manual - Dutch - 47 pages

Siemens gigaset e365 duo User Manual - French - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info