298807
7
Zoom out
Zoom in
Previous page
1/33
Next page
6
First steps
Gigaset E360 / SEA / A31008-M1805-Y701-1-7619 / starting.fm / 17.03.2010
Version 4, 16.09.2005
Attaching the belt clip
There are notches for attaching the belt clip
on the side of the handset at the same
height as the display.
¤ Press the belt clip onto the back of the
handset so that the protrusions on the
belt clip engage with the notches.
You can also attach a cord for carrying the
handset in your hand or wearing it around
your neck.
Opening the battery cover
¤ If fitted, remove the belt clip.
¤ Reach into the housing cavity and pull
the battery cover upwards.
Placing the handset in the base
station and registering
Requirement: the handset must not already
be registered on
any base station.
Registering the handset on the Gigaset E360
base station occurs automatically.
¤ Place the handset in the charging cradle
of the base station with its
display facing
forward
.
You will hear a confirmation tone.
Automatic registration can take up to
5 minutes. While registration is in progress
the screen displays Registering . The hand-
set is assigned the lowest unassigned inter-
nal number (1–4). If several handsets are reg-
istered on the base, the internal number is
shown in the display after registration, for
example 2. This means that the handset has
been assigned the internal number 2.
¤ To charge the batteries, leave the handset
in the charging cradle on the
base station.
Notes:
Automatic registration is only possible if the
base station on which you wish to register the
handset is not being used to make a call.
A key press cancels automatic registration.
If four handsets are already registered on the
base station there are two options:
The handset with the internal number 4 is
in idle status: the handset you wish to reg-
ister is assigned the number 4. The hand-
set that was previously number 4 is de-
registered.
The handset with the internal number 4 is
being used: the handset you wish to regis-
ter cannot be registered.
If automatic registration does not work the
handset will have to be registered manually
(page 17).
Notes:
The handset may only be placed in the base/
charging cradle provided for it.
If the handset has switched itself off because
the batteries are flat and is then placed in the
base/cradle, it will switch itself on automati-
cally.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset e360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset e360 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset e360

Siemens gigaset e360 User Manual - German - 37 pages

Siemens gigaset e360 User Manual - Dutch - 38 pages

Siemens gigaset e360 User Manual - French - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info