298392
30
Zoom out
Zoom in
Previous page
1/160
Next page
7
Making the handset ready for service
Gigaset CL1 / English / A31008-A021-B001-1-6Z19 / starting.fm / 11.09.2003
Registering the handset on the base
You must initiate handset registration on the handset and on the base.
1. On the handset
During the following registration process, all symbols will flash in the display.
2. At the base
Within 60 secs. of entering the system PIN:
Press the registration/paging key on the base for approximately 3 seconds (see also the
operating instructions for the base). The registration process then starts. When
registration is successful, the handset is automatically assigned the lowest unassigned
number.
Charging batteries
Leave the handset in the charger for the batteries to charge - the batteries are supplied
uncharged. The battery charging process is indicated on the handset by a flashing
battery symbol
V.
Once the batteries have been charged, your phone is ready for service. You need to set
the date and time to ensure that the time of incoming calls can be noted correctly
(page 11).
We recommend initially charging the batteries without interruption for the amount
of time listed in the table (page 19) – irrespective of the charging status icon! After
a while the charge capacity of the batteries will decrease for technical reasons.
Once initial charging is complete, you can replace your handset in the charger after
each call. Charging is controlled electronically. This ensures optimum battery
charging without overloading.
The batteries heat up during charging. This is normal and not dangerous.
[ _______________]
MENU
Press display key to open menu.
[__________] [______________________________________________] [__________]
REGISTER HS OK
Select the menu item and confirm.
[______]
OK
Enter the system PIN for the base station (default
setting: 0000) and confirm.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset cl1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset cl1 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info