38945
8
Zoom out
Zoom in
Previous page
1/30
Next page
7
First steps
Gigaset C47H / IM1 eng / A31008-M1951-R101-1-4N19 / main.fm / 29.10.08
Version 4, 16.09.2005
nal number, e.g. INT 2 for internal number
2. The handset is assigned the lowest
available internal number (1–6). If all
internal numbers 1–6 have been
assigned, number 6 is overwritten, pro-
vided the handset with the internal
number 6 is in idle status.
Automatic registration of Gigaset C47H
If the handset does not activate automati-
cally when the batteries are fitted, you
must first charge the batteries.
You must activate manual registration of
the handset on both the handset and the
base station.
Once it has been registered, the handset
returns to idle status. The handset's
internal number is shown in the display
e.g. INT 1. If not, repeat the procedure.
On the handset
v ¢ Ð ¢ Handset ¢ Register H/Set
~ Enter the system PIN of the
base station (the default is
0000) and press
§OK§. Base 1
flashes in the display.
On the base station
Within 60 sec. press and hold the registra-
tion/paging key on the base station
(approx. 3 sec.).
Headset socket
You can connect various headset types
(with 2.5 mm jack connector), including:
HAMA Plantronics M40, MX100 and
MX150.
A compatibility list of tested headsets can
be found on the Internet at
www.plantronics.com/productfinder
.
Charging batteries
¤ Plug the mains adapter of the charging
cradle into a mains power socket.
¤ Place the handset in the cradle with the
display facing forward.
To charge the batteries, leave the handset
in the charging cradle. If the handset is
activated, the flashing battery icon e in
the top right of the display indicates that
the batteries are being charged. During
handset operation, the battery icon indi-
cates the charge status of the batteries
(page 1).
Initial charging and discharging of
batteries
The correct charge level can only be dis-
played if the batteries are first fully
charged and discharged.
¤ To do this, leave the handset in the
charging cradle without interruption
for seven hours.
¤ Once the batteries are fully charged,
remove the handset from the cradle
and do not put it back again until the
batteries are fully discharged.
Please note:
Automatic registration is not possible when
the base station to which you wish to regis-
ter the handset is being used to make a call.
Each key press interrupts the automatic
registration.
If automatic registration does not work,
you will have to register the handset manu-
ally.
Please note:
The handset should only be placed in a
base station or charging cradle that is
designed for it.
The handset will automatically switch on if
it is placed in the charging cradle.
After the first battery charge and dis-
charge, you may place your handset in the
charging cradle after every call.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset C47H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset C47H in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset C47H

Siemens Gigaset C47H User Manual - German - 33 pages

Siemens Gigaset C47H User Manual - Dutch - 34 pages

Siemens Gigaset C47H User Manual - French - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info