298633
9
Zoom out
Zoom in
Previous page
1/41
Next page
Gigaset C 455 / Irland / A31008-M1707-V101-2-7619 / starting.fm / 11.7.07
6
First Steps
Setting up the handset for use
Inserting the batteries
¤ Fit the batteries with the correct polarity
(see diagram).
The polarity is indicated in the battery compart-
ment.
The handset switches on automatically. You will
hear a confirmation tone.
Closing the battery cover
¤ Position the cover pointing slightly down-
wards and push it up until it clicks into posi-
tion.
Opening the battery cover
¤ Press below the upper curve on the battery
cover and slide down.
Placing the handset in the base station
and registering
Important: the handset must not already be
registered to a base station.
Registering the handset to the Gigaset C455
base station occurs automatically.
¤ Place the handset in the charging cradle of
the base unit with its display facing for-
ward.
You will hear a confirmation tone.
Automatic registration takes around one
minute. While registration is in progress the
screen displays Registering and Base flashes.
The handset is assigned the lowest unassigned
internal number (1–4). If several handsets are
registered to the base, the internal number is
shown in the display after registration, e.g. INT
2. This means that the handset has been
assigned the internal number 2. If the handset
has been registered successfully you will see
the display key
§INT§ at the bottom left of the dis-
play.
¤ To charge the batteries, leave the handset in
the charging cradle on the base station.
For questions and problems see page 30.
Caution:
Use only the rechargeable batteries recommended by
Siemens on page 31. I.e. never use a conventional
(non-rechargeable) battery or other battery type,
otherwise serious damage to health and property
cannot be ruled out, e.g. the outer casing of the bat-
teries could be destroyed or the batteries could
explode. The phone could also malfunction or be
damaged as a result of using batteries that are not of
the recommended type.
Notes:
Automatic registration is not possible when the
base station on which you wish to register the
handset is being used to make a call.
A key press cancels automatic registration.
If four handsets are already registered to the base
station there are two options:
The handset with the internal number 4 is in
idle status: the handset you wish to register is
assigned the number 4. The handset that was
previously number 4 is de-registered.
The handset with the internal number 4 is
being used: the handset you wish to register
cannot be registered.
If automatic registration does not work the hand-
set will have to be registered manually (page 24).
Notes:
The handset may only be placed in the base pro-
vided for it.
When the handset is in the base station, it charges
even if it is switched off. You will see the charge
status in the display.
If the handset has switched itself off because the
batteries are flat and is then placed in the cradle,
it will switch itself on automatically.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset c455 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset c455 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset c455

Siemens gigaset c455 User Manual - German - 41 pages

Siemens gigaset c455 User Manual - Dutch - 41 pages

Siemens gigaset c455 User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info