301090
41
Zoom out
Zoom in
Previous page
1/55
Next page
40
Base station settings
C380 / IM-NORD EN / A31008-M2007-R201-1-SM19 / registr_sett.fm / 18.10.2008
Version 4, 29.10.2007
Changing the system PIN
You can change the base station's 4-digit
default system PIN ("0000") to a 4-digit
PIN known only to yourself.
§Menu§ ¢ Settings ¢ Base ¢ System PIN
~ Enter the old system PIN and
press
§OK§. For security, the PIN
is shown as four stars (
****
).
~ Enter your new system PIN
and press
§OK§.
a Press and hold (idle status).
Resetting the system PIN
If you have forgotten the system PIN, you
can reset it to the original code 0000 by
resetting the base station to its default set-
tings. This will also reset every other
setting, see "Restoring the base station to
the factory settings"
¢ page 40.
Repeater support
With a repeater you can increase the range
and reception strength of your base sta-
tion. You will need to activate repeater
mode. This will terminate any calls that
are in progress at the time.
Precondition: A repeater is registered.
The Eco Mode / Eco Mode+ mode is deac-
tivated.
§Menu§ ¢ Settings ¢ Base
¢ Additional Features ¢ Repeater Mode
§Yes§ Press the display key.
When repeater mode is active, the menu
item is marked with .
Restoring the base station to the
factory settings
When restoring factory settings:
u Handsets are de-registered
When resetting via the menu:
all Gigaset handsets
When resetting using the key on
the base station: also all handsets
of other GAP capable devices
u Individual settings are reset
u All lists are deleted
u The system PIN is reset to the original
code 0000
u Eco Mode+ is deactivated
Only the date and time are retained.
Resetting the base station via the
menu
§Menu§ ¢ Settings ¢ Base ¢ Base Reset
§OK§ Press the display key to
confirm.
Resetting the base station using a key
on the base station
¤ Disconnect the power cord from the
base station.
¤ Hold down the registration/paging key
(
¢ page 1) on the base station while
reconnecting the power cable to the
base station. Release the key after
approximately 5 seconds.
The base station has now been reset.
Please note
Repeater support and Eco Mode / Eco
Mode+ (
¢ page 34) cancel each
other out, i.e. both functions cannot
be used at the same time.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset c380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset c380 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset c380

Siemens gigaset c380 User Manual - German - 72 pages

Siemens gigaset c380 User Manual - Dutch - 65 pages

Siemens gigaset c380 User Manual - French - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info