Manual Siemens Gigaset C300H (page 41 of 52) (English)

504648

Zoom out

Zoom in

1/52

Industry Canada Certification

Gigaset C300H / USA EN / A31008-M2253-R301-2-3S19 / appendix.fm / 26.04.2011

Version 4, 16.09.2005

Industry Canada

Certification

Operation is subject to the following two condi-

tions (1) this device may not cause interference,

and (2) this device must accept any interference,

including interference that may cause undesired

operation of the device.

NOTICE: The Industry Canada label identifies certi-

fied equipment. This certification means that the

equipment meets certain telecommunications

network, protective, operational and safety

requirements as prescribed in the appropriate Ter-

minal Equipment Technical Requirements docu-

ment(s). The Department does not guarantee the

equipment will operate to the user’s satisfaction.

Before installing this equipment, users should

ensure that it is permissible to be connected to

the facilities of the local telecommunications

company. The equipment must also be installed

using an acceptable method of connection. The

customer should be aware that compliance with

the above conditions may not prevent

degradation of service in some situations.

Repairs to certified equipment should be coordi-

nated by a representative designated by the sup-

plier. Any repairs or alterations made by the user

to this equipment, or equipment malfunctions,

may give the telecommunications company cause

to request the user to disconnect the equipment.

Users should ensure for their own protection that

the electrical ground connections of the power

utility, telephone lines and internal metallic water

pipe system, if present, are connected together.

This precaution may be particularly important in

rural areas

NOTE: Users should not attempt to make such

connections themselves, but should contact the

appropriate electric inspection authority,

or electrician, as appropriate.

This product meets the applicable Industry

Canada technical specifications.

The Ringer Equivalence Number is an indication of

the maximum number of devices allowed to be

connected to a telephone interface. The termina-

tion of an interface may consist of any combina-

tion of devices subject only to the requirement

that the sum of the RENs of all devices does not

exceed five.

This Class B digital apparatus complies with Cana-

dian ICES-003.

Cet appareil numérique de la classe B est con-

forme à la norme NMB-003 du Canada.

FCC / ACTA Information

Warning: Changes or modifications to this unit

not expressly approved by Gigaset Communica-

tions USA LLC could void the FCC authority to

operate the equipment. This includes the addition

of any external antenna device.

This equipment complies with Part 68 of the FCC

rules and the requirements adopted by the ACTA.

On the bottom of the base station is a label that

contains, among other information, a product

identifier in the format US:AAAEQ##TXXXX. If

requested, this number must be provided to the

telephone company.

A plug and jack used to connect this equipment to

the premises wiring and telephone network must

comply with the applicable FCC Part 68 rules and

requirements adopted by the ACTA. A compliant

telephone cord and modular plug is provided

with this product. It is designed to be connected

to a compatible modular jack that is also compli-

ant. See installation instructions for details.

The REN is used to determine the number of

devices that may be connected to a telephone

line. Excessive RENs on a telephone line may result

in the devices not ringing in response to an

incoming call. In most but not all areas, the sum of

RENs should not exceed five (5.0). To be certain of

the number of devices that may be connected to

a line, as determined by the total RENs, contact

the local telephone company. For products

approved after July 23, 2001, the REN for this prod-

uct is part of the product identifier that has the

format US:AAAEQ##TXXXX. The digits repre-

sented by ## are the REN without a decimal point

(e.g., 03 is a REN of 0.3). For earlier products, the

REN is separately shown on the label.

A copy of the supplier's Declaration of Conformity

(SDoC) is available at this Internet address:

www.gigaset.com/docs.

If this equipment causes harm to the telephone

network, the telephone company will notify you

advance, that temporary discontinuance of serv-

ice may be required. But if advance notice isn’t

practical, the telephone company will notify the

customer as soon as possible. Also, you will be

advised of your right to file a complaint with the

FCC if you believe it is necessary.

The telephone company may make changes in its

facilities, equipment, operations or procedures

that could affect the operation of the equipment.

If this happens the telephone company will pro-

vide advance notice in order for you to make nec-

essary modifications to maintain uninterrupted

service. If you experience trouble with this tele-

phone system, disconnect it from the network

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset C300H in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset C300H

Siemens Gigaset C300H User Manual - German - 48 pages

Siemens Gigaset C300H User Manual - Dutch - 50 pages

Siemens Gigaset C300H User Manual - French - 54 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens Gigaset C300H Manual

Product: