504648
37
Zoom out
Zoom in
Previous page
1/52
Next page
35
Troubleshooting
Gigaset C300H / USA EN / A31008-M2253-R301-2-3S19 / appendix.fm / 26.04.2011
Version 4, 16.09.2005
Troubleshooting
If you have any queries about the use of your
telephone, visit our website at
www.gigaset.com/service
for assistance 24/7.
The table below contains a list of common
problems and possible solutions.
Protecting our
environment
Our environmental mission
statement
We, Gigaset Communications GmbH, bear
social responsibility and are actively com-
mitted to a better world. Our ideas, technol-
ogies and actions serve people, society and
the environment. The aim of our global
activity is to secure sustainable life resources
for humanity. We are committed to a respon-
sibility for our products that comprises their
entire life cycle. The environmental impact
of products, including their manufacture,
procurement, distribution, use, service and
disposal, are already evaluated during prod-
uct and process design.
Further information on our environmentally
friendly products and processes is available
on the Internet at www.gigaset.com
.
The display is blank.
1. The handset is not switched on.
¥ Press and hold the end call key a.
2. The battery is empty.
¥ Charge the battery or replace it
(¢ page 10).
"Base" flashes on the display.
1. The handset is outside the range of the base.
¥ Move the handset closer to the base.
2. The base's range is reduced because Eco Mode
is activated.
¥ Deactivate Eco Mode (¢ page 31) or
reduce the distance between the handset
and the base.
3. The base is not switched on.
¥ Check the base power adapter.
4. Handset has not been registered with the base
or has been deregistered.
¥ Register the handset (¢ page 12).
Handset does not ring.
1. The ringer is deactivated.
¥ Activate the ringer (¢ page 34).
3. The phone only rings if the phone number has
been transferred.
¥ Activate the ringer for unknown calls
(¢ page 34).
Each incoming call resets the date/time incor-
rectly.
The date and time are sent through e.g., your net-
work provider or PBX during calling line display.
This data may be incorrect.
¥ Set the date/time correctly e.g., on the router
or PBX.
¥ Do not automatically copy the date/time
(dependent on base, refer to base user guide).
The other party cannot hear you.
You pressed the mute key v during a call. The
handset is "muted."
¥ Unmute the microphone (¢ page 25).
The number of the caller is not displayed
despite Caller ID.
Caller ID is not enabled.
¥ The caller should ask the network provider to
enable Caller ID (CID).
You hear an error tone when keying an input.
Action has failed/invalid input.
¥ Repeat the process.
Watch the display and refer to the user guide if
necessary.
Exclusion of liability
Some displays may contain pixels (pic-
ture elements), which remain activated or
deactivated. As a pixel is made up of three
sub-pixels (red, green, blue), it is possible
that pixel colors may vary.
This is completely normal and does not
indicate an error.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset C300H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset C300H in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset C300H

Siemens Gigaset C300H User Manual - German - 48 pages

Siemens Gigaset C300H User Manual - Dutch - 50 pages

Siemens Gigaset C300H User Manual - French - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info