298472
12
Zoom out
Zoom in
Previous page
1/94
Next page
9
Preparing to use your phone
Gigaset C150 / englisch / A31008-C150-B101-2-7619 / starting.fm / 16.10.2003
Placing the handset into the base and charging the batteries
When you place the handset into the base, the handset will register automatically to
the base. Proceed step by step as follows:
1. Place the handset in the base with the display up.
2. Wait till the handset has registered automatically to the base (page 55): This opera-
tion takes around one minute. While registration is in progress the screen displays
Registering and Base 1 flashes. After registration, you will see a '1' in the top left
of the display – this means that the handset has been assigned the first internal
number.
3. Now leave the handset in the base for the batteries to charge – the batteries are sup-
plied uncharged. Battery charging is indicated in the top right of the display by the
battery icon
= flashing:
Should automatic registration be interrupted, register the handset manually as
described starting on page 56. You can get help from a table containing basic questions
and answers (page 72).
The battery charging status is correctly displayed only after uninterrupted charging/
discharging . You should therefore avoid removing the batteries unnecessarily and end-
ing the charging process prematurely.
Note
Your telephone is now ready for operation. With the Gigaset C 150, the answering
machine with pre-recorded announcement is also activated. To correctly record the time
of calls and messages (C 150) you should now set the date and time (page 14).
= Batteries flat V Batteries
2
/
3
charged
e Batteries
1
/
3
charged U Batt. fully charged
i
To register additional handsets , refer to page 56.
W
For the initial charge we recommend a continuous, uninterrupted charg-
ing period of five hours, whatever charge status is indicated. After a while
the charge capacity of the batteries will decrease for technical reasons.
i
Once initial charging is complete, you can replace your handset in the
base after each call. Charging is controlled electronically. This ensures
that the batteries are charged in a way that optimizes their life.
The batteries heat up during charging. This is normal and not danger-
ous.
12


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-gigaset-c150

Reset search

  • Phone won't hang up. When turn on it gives engaged tone. No incoming calls Submitted on 13-6-2018 at 21:56

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset c150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset c150 in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset c150

Siemens gigaset c150 User Manual - German - 88 pages

Siemens gigaset c150 User Manual - Dutch - 93 pages

Siemens gigaset c150 User Manual - French - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info