300765
10
Zoom out
Zoom in
Previous page
1/16
Next page
10
AS280-AS285 / AUS / A31008-M2042-C401-1-7619 / main.fm / 20.08.2010
Remote operation when on the move
You can check and activate your answer machine
from any other telephone (hotel, pay phone etc.).
Requirements:
You have set a system PIN other than 0000
¢ page 15.
The phone you are using for remote operation has
touch tone dialling (DTMF), i.e. you hear different
tones when you press the keys.
Calling the answer machine and playing back
messages
~ (Dial your own number) ¢ while listening to your
announcement: press the 9
key and enter the system
PIN
The following keys are used for operation:
Activating the answer machine
~ (Enter your own number and allow the phone to ring
until you hear the message: "Please enter PIN") ¢ ~
enter system PIN
Your answer machine is activated. It tells you how
much memory time is left. The messages are now
played back. The answer machine cannot be deacti
-
vated remotely.
Locating a handset
("paging")
You can locate your handset using the base station.
Briefly press the registration/paging key on the
base station
(¢ page 1).
All handsets will ring simultaneously ("paging"),
even if the ringer tones are deactivated.
End paging: briefly press the registration/paging key
on the base station
(¢ page 1) or the talk key c on
a handset.
Registering handsets
You can register up to four handsets on your base sta-
tion (Gigaset AS28H) recommended).
For automatic registration of handsets to
Gigaset
AS280/AS285 ¢ page 5.
Manual registration of handsets to
Gigaset AS280/AS285
1. On the handset: MENU ¢ Settings ¢ OK
¢ Handset ¢ OK ¢ Register HS ¢ OK ¢ Enter
the system PIN of the base station (default is 0000)
¢ OK.
Registering flashes in the display.
2. On the base station: within 60 seconds of entering
the system PIN, press and hold the registration/pag
-
ing key (¢ page 1) (min. 3 seconds).
Registration takes approx. 1 minute.
De-registering handsets
Handsets can only be de-registered by resetting the
base station to its default settings. This will also reset
other settings
¢ page 11.
If you have only registered handsets for other GAP-
compatible devices, these can only be de-registered
with a hardware reset
¢ page 11.
Using several handsets
Making internal calls
Internal calls are free calls to other handsets that are
registered to the same base station.
To make a call to other handsets, press
INT ¢ ~ (1...4, enter internal number of the
handset), the handset is called or
INT ¢ star key P, all handsets are called.
When a participant answers you can speak to them.
To end the call, press the end call key
a.
Internal consultation call/connecting
a call
You are in conversation with an external participant.
Press the
INT key and call one or all handsets. The
external participant hears the hold music.
Before the internal participant has answered,
press the end call key
a; the call is diverted to the
participant who answers the call.
After the internal participant has answered, you can
talk to him. Press the end call key
a; the call is
diverted, or press the display key
; you are recon-
nected to the external participant.
A
Go to the start of the current message.
Press twice to go back to the previous mes-
sage.
B
Stop playback. Press again to resume.
3
Skip to next message.
0
delete current message.
Please note:
Each additional handset must be registered on the
base station in order for it to work properly!
Please note:
This equipment may not provide for the effective
hand-over of a call to another device connected to
the same line.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset as280 duo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset as280 duo in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset as280 duo

Siemens gigaset as280 duo User Manual - German - 16 pages

Siemens gigaset as280 duo User Manual - Dutch - 16 pages

Siemens gigaset as280 duo User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info